We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small cylindrical cutting tool with two spiral flutes and rounded ball nose tip

M.A. Ford

M.A. Ford Tuffcut DM 2 Flute Ball Nose End Mill 3/32 15609370A

SKU CH-4AKR-XYNC3

A two-flute ball-nose end mill for precision contour milling in a 3/32 diameter

  • Product typeCutting Tools
  • Tuffcut DM end mill for precision milling
  • Two-flute ball nose design for smooth contouring
  • 3/32 inch diameter suits fine detail work
  • M.A. Ford brand trusted for cutting tools
  • California Proposition 65 warning for chemical awareness

Industrial cutting tool for precision machining

The M.A. Ford Tuffcut DM end mill is a two-flute ball nose cutter designed for contouring and profiling in a range of materials. It is intended for machinists and fabricators who require a new, high-performance tool for detailed milling operations.

3/32 inch cutting diameter

The single specification that determines fit is the 3/32 inch cutting diameter, which must match the programmed tool path and workpiece requirements. This dimension governs the minimum internal radius and step-over capability for the job.

Suited for detailed contour work in metals

This cutter suits users performing finishing passes or 3D profiling where a small ball radius is essential. It is not for buyers who need larger diameter tools for heavy material removal or high feed-rate roughing.

How it compares

Measured against everything we stock in Yard Ornaments & Garden Statues, at today’s prices. Recalculated every night.

Price $43.99
Typical for this category: the median of 1,271 items is $40.99.

Specifications

Product
Brand nameM.A. FORD
Product typeCutting Tools

Questions about this item

What does the 3/32 size mean when I put this end mill in my machine?

The 3/32 diameter determines the smallest radius you can cut and the chip load per tooth, so feed rates must match that width to avoid tool breakage.

What shank interface does the Tuffcut DM 15609370A use and what does that limit?

The tool uses a standard cylindrical shank held in a collet or end-mill holder, which caps run-out to the holder's tolerance and limits maximum stick-out before vibration.

What physical clearance does the 3/32 ball nose need to fit in my setup?

You need at least 3/32 diameter clearance for the ball tip plus enough shank length above the flutes to clear the holder and workpiece without interference.

More in Yard Ornaments & Garden Statues

Similar items