We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
M.A. Ford Twister Xd 3X coolant-fed drill, 3.00 mm shank, metallic finish

M.A. Ford

M.A. Ford Twister Xd 3X Coolant Fed Drill 3.00 mm

SKU CH-15GF-6F69V

A 3.00 mm coolant-fed drill for deep-hole drilling with internal lubrication

  • 3X coolant-fed design clears chips efficiently at 3.00 mm diameter
  • Twister Xd geometry improves hole accuracy in tough materials
  • M.A. Ford construction delivers reliable performance for production drilling
  • Coolant-through capability reduces heat buildup during deep-hole operations
  • California Proposition 65 compliance ensures regulated chemical disclosure

3 mm coolant-fed drill for CNC metalwork

The M.A. Ford Twister Xd 3X is a solid-carbide drill with internal coolant channels and a 3.00 mm cutting diameter. It is built for high-speed drilling in steels, stainless alloys and cast iron on CNC machines where through-tool coolant improves chip evacuation and tool life.

Replaces standard external-coolant drills

When hole depth exceeds three diameters, external flood coolant often fails to reach the cutting zone. The internal coolant feed clears chips from deep holes, reduces cycle time and prevents premature wear that occurs with conventional drills in the same material.

Requires a machine spindle

The shank must seal against a coolant inducer or holder rated for the system pressure used in the shop. It frees the programmer from peck cycles in many materials, shortening code and reducing non-cutting time. Buyers without through-spindle coolant cannot use this drill as intended.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $78.99
Typical for this category: the median of 2,412 items is $81.99.

Specifications

Product
Brand nameM.A. FORD

Questions about this item

What shank size fits the Twister Xd 3X Coolant Fed Drill 3.00 mm?

The drill has a 3.00 mm diameter, so it requires a collet or chuck that accepts a 3.00 mm shank.

How do I install the coolant-fed drill correctly?

Insert the drill fully into the holder, align the internal coolant channel with the machine supply, and tighten securely; the step often missed is verifying coolant flow before starting the cut.

When should I replace the 2XDCS1181A drill?

Replace it when the cutting edges show wear, chipping, or when hole quality drops below tolerance; inspect after each job to catch dulling early.

More in Power Drills, Drivers & Cutting Bits

Similar items