M.A. Ford Twister Xd 3X Coolant Fed Drill 5.50mm

Drill Purpose & Users

The M.A. Ford Twister Xd 3X Coolant Fed Drill is a 5.50 mm cutting tool designed for precision holemaking in metalworking applications. It serves machinists and fabricators who require accurate, repeatable results in production or maintenance environments. The coolant-fed design supports efficient chip evacuation and extended tool life. Buyers needing larger diameters or non-coolant drills should select a different model.

Sustained-Load Behaviour

Under continuous cutting the drill maintains stable performance thanks to its internal coolant channels that deliver fluid directly to the cutting edges. This flow reduces heat buildup at the tip and flushes chips away from the flutes, preventing packing that can cause premature wear or breakage. The 3X geometry further promotes consistent material removal rates during long cycles.

Thermals, Noise & Power

Coolant delivery manages thermal load at the cutting zone, keeping the workpiece and tool within acceptable temperature ranges during normal operation. The drill itself produces no noise; sound levels depend entirely on the machine spindle and workpiece setup. Power consumption is determined by the host machine’s drive system and the specific cutting parameters chosen.