We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
M.A. Ford Twister Xd coolant-fed drill bit, Q size

M.A. Ford

M.A. Ford Twister Xd 5X Coolant Fed Drill 2XDCR3320A Q

SKU CH-21Y0-5ZNRY

Coolant-fed Twister Xd drill with 5X reach, model 2XDCR3320A, for deep-hole drilling

  • 5x coolant-fed drilling for efficient chip removal
  • Twister XD design for high-performance drilling
  • M.A. Ford quality for professional applications
  • Model 2XDCR3320A identifies exact specification
  • California Proposition 65 chemical warning applies

Application and design

This Twister Xd drill is a coolant-fed cutting tool built for production drilling where through-tool lubrication improves chip evacuation and tool life. The 5× diameter length suits deeper holes in a single pass. It is aimed at machine shops and maintenance teams that run CNC or dedicated drilling units and need consistent performance in steel, cast iron and similar materials.

Who it suits and who it does not

Shops that have coolant-through spindles and run high-volume drilling cycles will benefit from the internal coolant channel. Operations without through-coolant capability, or those that only drill shallow holes by hand, will not use the feed feature and should consider a standard solid drill instead.

Critical specification

The 5× diameter flute length is the single figure that decides fit: it sets the maximum drill depth per engagement and determines whether the tool clears the workpiece without pecking. Verify that your machine spindle and holder accept the shank and that the programmed depth matches this length before ordering.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $176.99
Pricier than about 75% of the 2,412 comparable items (median $81.99).

Specifications

Product
Brand nameM.A. FORD

Questions about this item

How is the M.A. Ford Twister Xd 5X Coolant Fed Drill installed and what step do operators often miss?

Mount the drill in a rigid holder, align the coolant port with the machine supply, then lock the collet. The step most often missed is verifying coolant flow through the internal channels before the first cut.

What maintenance or replacement will the 2XDCR3320A drill need later?

Inspect the cutting edges after each job; resharpen or replace the drill when flank wear reaches the limit. Flush the coolant passages weekly to prevent blockage from swarf buildup.

What limit appears first on the Twister Xd drill during sustained high-feed drilling?

The internal coolant passages clog with fine swarf before the carbide substrate overheats, forcing an unplanned stop to clear the tool.

More in Power Drills, Drivers & Cutting Bits

Similar items