We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver cylindrical drill bit with coolant channels and pointed tip

M.A. Ford

M.A. Ford Twister Xd 5X Coolant Fed Drill 9.30mm

SKU CH-RAK6-V7XKS

Coolant-fed drill bit with 5× diameter depth capability for 9.30 mm holes

  • Twister Xd 5X design drills five times diameter deep
  • Coolant-fed operation clears chips and reduces heat
  • 30 mm diameter suits precise hole-making
  • M.A. Ford brand delivers professional-grade tooling
  • Proposition 65 warning informs safe handling practice

9.30 mm Twister Xd coolant-fed drill

The M.A. Ford Twister Xd is a 9.30 mm diameter drill designed with internal coolant delivery. It targets machinists who need consistent hole quality in deep drilling operations where chip evacuation and heat control are critical.

Replaces standard twist drills without coolant feed

Conventional drills rely on external flood coolant that often fails to reach the cutting zone at depth. The internal channels on this tool direct coolant to the tip, extending tool life and allowing higher feed rates when hole depth exceeds several diameters.

Suited for CNC and manual machines

Shops without through-spindle or high-pressure coolant capability cannot use the internal feed feature. Buyers who need larger diameters, different lengths or non-coolant-fed geometries should look at other tooling options.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $213.99
Pricier than about 81% of the 2,412 comparable items (median $81.99).

Specifications

Product
Brand nameM.A. FORD

Questions about this item

What shank diameter does the 9.30 mm Twister Xd 5X drill need for a secure fit?

The drill has a 9.30 mm cutting diameter and a matching cylindrical shank, so it requires a collet or chuck that grips 9.30 mm exactly.

How do you connect coolant to the 2XDCR3661A drill and what step is often missed?

Feed coolant through the machine spindle into the drill's axial hole; the step often missed is verifying the coolant port is open and sealed before starting the cycle.

When should the 9.30 mm Twister Xd 5X drill be replaced based on wear?

Replace the drill when the cutting lips show visible rounding, chipping, or when hole diameter exceeds tolerance, typically after the tool life recommended for the workpiece material.

More in Power Drills, Drivers & Cutting Bits

Similar items