M.A. Ford Twister Xd 7X+ Coolant Fed Drill 11.80mm
Coolant-fed Twister Xd 7X+ drill cuts 11.80 mm holes with internal lubrication
- Twister Xd 7X+ design for extended reach
- Coolant-fed drilling clears chips efficiently
- 80 mm diameter suits precise hole sizes
- M.A. Ford quality for reliable performance
- California Proposition 65 warning informs safe handling
Application Focus
The M.A. Ford Twister Xd 7X+ Coolant Fed Drill is built for precision holemaking in demanding materials. Its 11.80mm diameter suits production runs where consistent size and finish are critical. Machinists running CNC centres or rigid manual machines will value the through-coolant design for chip evacuation.
Upgrade Path
This tool replaces standard twist drills that rely on external flood coolant or peck cycles. The internal coolant channels deliver lubricant directly to the cutting edges, reducing cycle time and extending tool life in deep holes. The jump is worth it when hole depth exceeds three diameters or when workpiece material hardens under heat.
Sustained Performance
Under continuous load the coolant-fed geometry maintains stable temperatures at the drill point. Flutes stay clear because chips are flushed outward under pressure, preventing packing and re-cutting. The result is tighter hole tolerance and predictable wear rates across long batches without intermittent stops for chip clearing.
How it compares
Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.
- Price $408.99
- Pricier than about 91% of the 2,412 comparable items (median $81.99).
Specifications
| Product | |
|---|---|
| Brand name | M.A. FORD |
Questions about this item
What chuck or holder size does the 11.80 mm drill shank require?
The drill has an 11.80 mm diameter shank, so use a collet, hydraulic holder or shrink-fit chuck bored to 11.80 mm for a secure fit.
How do I connect coolant to the 2XDCL4646A drill and what step is often missed?
Feed coolant through the machine spindle into the drill’s internal channels; the step often missed is verifying that the coolant passages are clear before starting the cut.
When should the 11.80 mm Twister Xd 7X+ drill be replaced or reconditioned?
Replace or regrind the drill when flank wear reaches the manufacturer’s limit, when hole diameter drifts out of tolerance, or when thrust force rises sharply during drilling.
More in Power Drills, Drivers & Cutting Bits
Similar items
M.A. Ford
M.A. Ford Cyclone Xd 8X Coolant Fed Double Margin Drill 15/32 11.9
$407.99
0.00493176BTC
In stock
YINGHUA
YINGHUA 10PCS Single Flute UP Spiral Cutter 6x22x45mm
- Right-Angle Drills
$119.99
0.00145043BTC
In stock