We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver twist drill bit with coolant hole, 9.20 mm diameter

M.A. Ford

M.A. Ford Twister Xd 7X+ Coolant Fed Drill 9.20 mm

SKU CH-DHDN-JB9GG

Coolant-fed drill bit bores 9.20 mm holes with through-tool lubrication

  • 7X+ flute design enables deep-hole drilling
  • Coolant-fed operation improves chip evacuation
  • 20 mm diameter suits precise applications
  • M.A. Ford brand ensures professional-grade quality
  • New condition guarantees factory-original performance

Precision drill for metalwork

The M.A. Ford Twister Xd 7X+ Coolant Fed Drill is a 9.20 mm cutting tool built for high-performance drilling in metal. It targets machinists and fabricators who need accurate holes with efficient chip evacuation in demanding materials.

Internal coolant delivery

The drill features an integrated coolant feed that directs fluid straight to the cutting zone. This design reduces heat buildup, extends tool life and improves hole quality by flushing chips away from the flutes during deep-hole operations.

Diameter determines fit

The 9.20 mm diameter is the critical specification that decides compatibility with your hole-size requirement. Verify this exact measurement matches the intended fastener or bore tolerance before purchase.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $267.99
Pricier than about 87% of the 2,412 comparable items (median $81.99).

Specifications

Product
Brand nameM.A. FORD

Questions about this item

How often does the coolant-fed design require seal or fitting maintenance?

The drill uses an internal coolant channel; inspect seals at each tool change and replace fittings if leakage appears.

What limits continuous drilling depth in a single pass?

The 7X+ length ratio allows holes up to roughly seven times the 9.20 mm diameter before chip evacuation becomes the limiting factor.

Does the tool generate noticeable heat during extended production runs?

Coolant fed through the shank carries heat away from the cutting edges, keeping the drill body cooler during long cycles.

More in Power Drills, Drivers & Cutting Bits

Similar items