We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Carbon steel weld-on pad eye with oval ring, plain steel finish

Mag-Mate

Mag-Mate PE0200 Pad Eye 11/16" depth 4,000 lb WLL

SKU CH-ZV6V-TYX7N

Carbon steel pad eye with an 11/16 in depth and a 4,000 lb working load limit for weld-on mounting

  • Main materialHAWA
  • Weld-on mounting creates a permanent anchor point
  • Carbon steel construction delivers 4,000 lb working load limit
  • ASME BTH-1 compliance confirms structural integrity
  • 11/16 inch depth suits low-profile installations
  • One-year manufacturer warranty backs material quality

Pad Eye Weld-On Mounting

The Mag-Mate PE0200 is a carbon steel pad eye designed for permanent weld-on installation on vehicles or equipment. It provides a fixed anchor point for lifting or securing loads with a working load limit of 4,000 lb. The unit meets ASME BTH-1 standards and includes a date code for traceability.

Sustained Load Behaviour

Under continuous load the carbon steel body resists deformation up to the rated working load limit of 4,000 lb. The weld-on base distributes force across the mounting surface rather than concentrating stress on a single fastener. The steel finish protects the material during extended outdoor exposure.

Pre-Installation Checks

Verify that the mounting surface is suitable for welding and can support the 4,000 lb working load limit without distortion. Confirm the 11/16 in depth and 3-1/4 in length match the available space on your equipment. Ensure welding procedures follow applicable structural codes for the intended application.

How it compares

Measured against everything we stock in Face Masks, Respirators & PPE, at today’s prices. Recalculated every night.

Price $28.99
Pricier than about 54% of the 5,612 comparable items (median $24.99).

Specifications

Product
Brand nameMAG-MATE
Size & build
Main materialHAWA

Questions about this item

Does the 11/16 in depth of the PE0200 pad eye affect how much heat builds up during continuous welding?

The carbon steel body dissipates heat normally during weld-on installation; no special cooling is required for the 11/16 in depth.

What base material must I already have to weld the PE0200 pad eye in place?

A clean carbon steel structure at least 11/16 in thick is needed for a full-penetration weld on the PE0200.

Will the 43/64 in ring diameter of the PE0200 accept the same shackles I use on older 1/2 in pad eyes?

The 43/64 in ring is larger than a 1/2 in ring, so existing shackles with a 1/2 in pin will fit with clearance.

More in Face Masks, Respirators & PPE

Similar items