Manfrotto FF3276 Steel Safety Cable 20 kg 44 lbs
Steel safety cable rated for 20 kg or 44 lbs secures lighting fixtures with a carabiner and swivel hook to prevent accidental falls
- Product typeLighting
- Supports heavy fixtures up to 20 kg or 44 lbs
- Steel construction resists wear in studio environments
- Carabiner and swivel hook enable quick, secure attachment
- Tethers to rails, pipes, ceilings or walls for versatile rigging
- Spring catch and hook-up slot add a reliable failsafe layer
Steel safety cable for lighting rigs
The Manfrotto FF3276 steel safety cable provides a secondary attachment point for overhead lighting fixtures and grip equipment. It is intended for photographers and videographers who need a failsafe against accidental drops in studio or location environments. The cable acts as a backup when the primary support system is compromised.
Rated for 20 kg or 44 lbs maximum load
The cable supports equipment weighing up to 20 kg (44 lbs), covering typical lighting heads, modifiers and telescopic posts. Loads beyond this limit exceed the rated capacity and require a different safety solution. The steel construction maintains integrity under sustained tension within the specified range.
Carabiner and swivel hook for versatile rigging
One end carries a carabiner and the other a swivel hook with a spring catch, allowing quick connection to rails, pipes, ceilings, walls, telescopic posts or pantographs. The swivel action reduces twisting stress on the attachment points. No tools are required for installation or removal.
How it compares
Measured against everything we stock in Photo Lighting & Studio Flashes, at today’s prices. Recalculated every night.
- Price $30.99
- Cheaper than about 76% of the 3,696 comparable items (median $57.99).
Specifications
| Product | |
|---|---|
| Product type | Lighting |
Questions about this item
Will the 20 kg cable secure my older steel lighting stand without damaging its finish?
The 20 kg rated steel cable uses a carabiner and swivel hook that clamp onto standard stand diameters and pipework without marring the surface.
How do I confirm the spring catch on the FF3276 is engaged correctly after clipping it to a pantograph?
Pull firmly on the cable; the spring-loaded gate on the carabiner and the hook slot must both snap fully closed with no visible gap.
Does the box include any mounting brackets or only the cable with carabiner and swivel hook?
Only the steel safety cable with integrated carabiner and swivel hook is supplied; brackets, clamps or additional hardware are not included.
More in Photo Lighting & Studio Flashes
Similar items
EMART EM-L15 10" Ring Light Kit 55" Tripod Bluetooth
- EM-RL-10-N
- 1*Ring Light, 1*Pho…
Neewer LT-05 USB Ring Light 48 LED 10W 3200-6800K 5 Inch Clip-On
- LT-05
- 5 in (12.7 cm)
Canon VL-5 Video Light 3186B001 for HG20 HG21
- Video Light
- Canon Video Light V…





