Manw Right 90 Degree HDMI 2.1 Cable 6.6FT 48Gbps 8K@60Hz 4K@120Hz 2K@240Hz

Right-Angle HDMI 2.1 Cable for Tight Spaces

This Manw cable carries 48Gbps bandwidth under the HDMI 2.1 standard and uses a 90-degree plug to fit behind wall-mounted TVs, monitors or consoles without bending. It supports 8K at 60Hz, 4K at 120Hz and 2K at 240Hz for high-frame-rate gaming and video. Gold-plated contacts and multi-layer shielding reduce signal loss and electromagnetic interference. The 6.6ft length connects graphics cards, consoles, smart TVs and projectors with plug-and-play simplicity.

Ideal for Cramped AV Racks; Not for Long Runs

Builders routing cables through narrow gaps behind furniture or inside cabinets benefit from the right-angle connector that prevents port strain and kinked wires. Gamers and home-theatre users gain the full 48Gbps link for uncompressed 8K or high-refresh 4K and 2K signals. Installers needing in-wall ratings, plenum jackets or distances beyond 6.6ft should select a different cable type. The fixed male-to-male ends also rule out setups requiring gender changers or couplers.

90-Degree Connector Decides Fit

The right-angle HDMI plug is the single specification that determines whether this cable solves the installation problem. It orients the cable downward or sideways at the port, clearing low-clearance backs on TVs, soundbars and consoles where a straight plug would collide with the mounting surface or adjacent cables. If the equipment has ample rear depth or the port faces outward, a standard straight cable works equally well and the angled design offers no advantage.