Maximm Cat 6 Ethernet Cable 40 ft 12-Pack 2 in 1 accessory
Twelve 40 ft Cat 6 patch cables with gold-plated RJ45 connectors deliver 10 Gbps at 550 MHz for wired networking
- High-speed networking up to 10 Gbps with 550 MHz bandwidth
- Reliable signal integrity from UTP twisted pairs with internal separator
- Durable connections via gold-plated RJ45 plugs and snagless boots
- Standards-compliant build meeting ANSI/TIA-568-C.2, REACH and RoHS
- Broad device compatibility across PCs, servers, routers, switches and NAS
Twelve cables for wired networking
This twelve-pack supplies forty-foot Cat 6 patch cords for homes, offices or server rooms that need multiple long runs. Each cord uses a 24AWG copper-clad aluminium conductor with HDPE insulation and a PVC jacket. Gold-plated RJ45 connectors feature moulded snagless boots and strain relief for durable connections.
550 MHz bandwidth and 10 Gbps headroom
The cables meet ANSI/TIA-568-C.2 and support 10BASE-T, 100BASE-TX, 1000BASE-T and 10GBASE-T up to 550 MHz. They handle gigabit and ten-gigabit links comfortably, but shielded or higher-category cables are required for environments with heavy electromagnetic interference or certified 10G distances beyond the standard limit.
UTP construction with snagless boots
Unshielded twisted-pair design with a pair separator reduces crosstalk during normal operation. The flexible PVC jacket and moulded boots protect the latch and relieve strain without adding bulk. REACH and RoHS compliance confirms restricted-substance adherence for indoor installations.
How it compares
Measured against everything we stock in 2-in-1 Device Accessories, at today’s prices. Recalculated every night.
- Price $90.99
- Pricier than about 71% of the 7,473 comparable items (median $56.99).
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Will the 40 ft Cat 6 cables work with my older 100BASE-TX router and Gigabit switch?
Yes. The cables support 10BASE-T, 100BASE-TX, 1000BASE-T and 10GBASE-T, so they will negotiate down to 100 Mbps on the router and up to 1 Gbps on the switch.
How can I verify each 40 ft cable is performing at 550 MHz / 10 Gbps after installation?
Use a cable certifier or a laptop with iperf3 to test throughput; a pass at 10 Gbps confirms the 550 MHz bandwidth and ANSI/TIA-568-C.2 compliance.
What comes in the 12-pack box and do I need separate RJ45 connectors or boots?
The box contains twelve 40 ft Cat 6 UTP patch cords with gold-plated RJ45 plugs and molded snagless boots already attached; no extra connectors or boots are required.
More in 2-in-1 Device Accessories





