Meterk 12V 1114208 300A Continuous Duty Solenoid Relay
A 12 V SPST continuous-duty solenoid relay rated for 300 A with nickel-plated cover and potted coil for vibration resistance
- Fit and compatibilityOut-Opening, Narrow Stile, Store Front Doors
- 300 A continuous current for heavy-duty winch and marine use
- 12 VDC coil with 10.2 W power draw and 14 Ω resistance
- SPST normally-open design gives simple on-off control
- Nickel-plated cover resists corrosion in harsh environments
- Potted coil interior withstands vibration and moisture
Meterk 12V 300A Continuous Duty Solenoid Relay
The Meterk 12V 1114208 is a nickel-plated SPST relay rated for 300 A continuous duty. It uses a normally open contact configuration with a single off-on circuit. The unit replaces multiple OEM part numbers across golf cart, winch and marine applications.
12 VDC coil limits and contact behaviour
The coil draws 10.2 W at 14 Ω resistance and is wound with 180 copper wire. Contacts are normally open and rated for a maximum transient current of 300 A. The potted coil interior provides vibration resistance, while the nickel-plated cover helps prevent corrosion in harsh environments.
Bracket mounting and fitment checks before ordering
Verify the straight bracket mounting holes measure 5/16 by 19/32 inches on a 2-13/64 inch centre spacing. Confirm your system requires a 12 VDC SPST normally open relay with a single circuit. Ensure the continuous 300 A rating matches the load profile of the intended winch, golf cart or marine circuit.
How it compares
Measured against everything we stock in Solenoid & Power Relays, at today’s prices. Recalculated every night.
- Price $24.99
- Typical for this category: the median of 125 items is $26.99.
Specifications
| Product | |
|---|---|
| Brand name | Meterk |
| Part number | 12 V 1114208 |
| Compatibility | |
| Fit and compatibility | Out-Opening, Narrow Stile, Store Front Doors |
Questions about this item
Which version of the Meterk 12V 1114208 solenoid relay should I choose for a 12 VDC system needing 300 A continuous duty?
This model is a single 12 VDC SPST normally-open relay rated for 300 A continuous current with a nickel-plated cover and potted coil for vibration resistance.
What does the 300 A continuous rating mean once the relay is installed in a winch or golf-cart circuit?
The contacts can carry 300 A continuously at 12 VDC without overheating, and the transient capability reaches the same 300 A peak during motor inrush.
How does the SPST normally-open interface limit the way I wire this relay in a 12 VDC control circuit?
The single-pole single-throw normally-open contacts close only when the 12 VDC coil is energised; the 14 Ω coil draws 10.2 W, so the control circuit must supply that power to latch the relay.
More in Solenoid & Power Relays
Similar items
Meterk 200A 12VDC Continuous Solenoid Relay 3 Terminal SPST
- Out-Opening, Narrow…
- Relays





