We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Micro 100 RC-375040 brazed carbide tool bit, 6 in long, 3/8 in wide, zinc finish

Micro 100

Micro 100 RC-375040 brazed tool bit RC 6 in 3/8 in

SKU CH-0B6F-W683C

Carbide-tipped brazed tool bit for right-hand turning operations with a 3/8 inch shank width

  • Main materialHAWA
  • Product weight0.25
  • Carbide tip keeps a sharp edge longer
  • HAWA material resists wear in tough cuts
  • Right-hand design feeds smoothly on lathes
  • 3/8 in shank fits standard tool holders
  • Light .25 lb weight reduces operator fatigue

Single-Point Tool Bit RC

This Micro 100 brazed tool bit uses HAWA carbide material with a zinc coating for right-hand cutting operations. The RC designation indicates its specific geometry for turning applications. It arrives new and ready for use in compatible tool holders.

Check Shank Width and Tool Holder

Verify your tool holder accepts a 3/8 in shank width before ordering. The overall length is 6 in, so confirm your machine provides adequate clearance. Ensure the right-hand orientation matches your cutting direction requirements.

Suits Lathe Operators Using Carbide Tooling

Machinists running manual or CNC lathes with standard tool holders will find this bit suitable for general turning. Builders needing left-hand cutting geometry or a different shank size should look at alternative tool bits. Those requiring indexable inserts rather than brazed tips will need a different system.

How it compares

Measured against everything we stock in Utility & Specialty Hand Tools, at today’s prices. Recalculated every night.

Price $23.99
Typical for this category: the median of 2,474 items is $23.99.

Specifications

Product
Brand nameMicro 100
Size & build
Main materialHAWA

Questions about this item

What comes in the package and is anything else needed to use the Micro 100 RC-375040 brazed tool bit?

The package contains the single-point carbide tool bit with a 3/8 in. shank width. No additional components are required for installation in a compatible tool holder.

How do I choose between the available versions or capacities of the Micro 100 RC-375040?

This item is offered as a single configuration: right-hand, carbide, zinc, 6 in. length, 3/8 in. shank width. There are no alternative versions or capacities to select from.

What does the 6 in. overall length mean when the bit is mounted in a lathe or tool post?

The 6 in. length provides extended reach for deeper cuts while the 3/8 in. shank fits standard holders. The HAWA carbide material maintains edge hardness during turning operations.

More in Utility & Specialty Hand Tools

Similar items