We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Micro 100 carbide engraving tool 12.00 mm 30 degree uncoated

Micro 100

Micro 100 RTCM-060-2 Engraving Tool 12.00 mm 30° Carbide

SKU CH-KF2F-BT13Z

Double-ended carbide engraving tool with 30° tip and 12.00 mm cut length

  • 30° angle cuts clean V-grooves in hard materials
  • 00 mm length of cut reaches deeper in a single pass
  • Solid carbide body resists wear on abrasive metals
  • Uncoated surface keeps edges sharp for non-ferrous work
  • Double-ended design gives two fresh tips per tool

Engraving Tool 12.00 mm 30° Carbide

This Micro 100 engraving tool is a double-ended carbide cutter with a 30-degree included angle and 12.00 mm length of cut. It is supplied uncoated and manufactured to metric dimensions for precision engraving work in a workshop or production environment.

Thermals Noise Power Draw

As a solid carbide hand-tool accessory it generates no operational heat, produces no audible noise and draws no electrical power during use. Performance depends entirely on the spindle speed feed rate and rigidity of the machine tool holding it.

Build Fit Requirements

The tool fits any collet or holder that accepts its metric shank diameter freeing the user from proprietary tooling systems. It requires a rigid CNC or manual milling setup with appropriate run-out control and does not suit handheld rotary tools or low-rigidity routers.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $22.99
Cheaper than about 58% of the 5,493 comparable items (median $27.99).

Specifications

Product
Brand nameMICRO 100

Questions about this item

How do I install the Micro 100 RTCM-060-2 engraving tool in my CNC machine and what step is commonly missed?

Mount the 12.00 mm carbide shank in a compatible ER collet or shrink-fit holder, then tighten to the machine builder's torque spec; the step most often missed is verifying the 30° included angle aligns with the programmed toolpath before cutting.

What maintenance or replacement will this uncoated carbide engraving tool need over time?

The cutting edges will gradually dull; plan to regrind the 30° tip on a diamond wheel or replace the tool once flank wear exceeds your tolerance for burr size on the workpiece.

What limit appears first during sustained engraving passes with this tool?

Heat buildup at the uncoated carbide tip is the first limiting factor; excessive temperature accelerates edge breakdown, so use peck cycles or air blast to manage thermal load.

More in Bits, Hole Saws & Accessory Kits

Similar items