We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
2.5 inch U.2 enterprise NVMe SSD with silver metal casing

Micron

Micron 9200 PRO 3.84TB 2.5" U.2 NVMe Enterprise SSD

SKU CH-F94M-5VQN7

A 3.84 TB U.2 enterprise NVMe SSD delivering 3500 MB/s reads, 3100 MB/s writes and 840,000 random read IOPS for low-latency data-centre workloads

  • Total capacity3.84 TB
  • Sequential read speedUp to 3,500 MB/s
  • Sequential write speedUp to 3,100 MB/s
  • Interface typePCI-Express 3.0
  • Form factor2.5 in U.2
  • Random read (4K)Up to 840,000 IOPS
  • 84TB capacity stores massive enterprise datasets
  • 3500 MBps sequential read accelerates data-intensive workloads
  • 3100 MBps sequential write enables fast data ingestion
  • 840000 IOPS random read delivers low-latency access
  • 2000000 hours MTBF ensures long-term drive reliability

3.84TB U.2 NVMe drive for enterprise servers

The Micron 9200 PRO is a 3.84TB 2.5" U.2 NVMe enterprise SSD built for performance-critical cloud and data centre workloads. It connects via PCI-Express 3.0 and uses triple-level cell flash. The drive is new and designed for internal server installation where consistent throughput and low write latency are required.

Sustained write performance and latency

Under sustained load the drive delivers up to 3100 MBps sequential write and up to 170,000 IOPS 4KB random write. Its architecture targets the lowest average write latency in the market to maintain throughput during heavy enterprise workloads. Active power consumption is 3.3W and MTBF is rated at 2,000,000 hours.

U.2 form factor and PCIe 3.0 interface

The 2.5" U.2 form factor and PCI-Express 3.0 NVMe interface determine compatibility with drive bays and backplanes. Buyers who need a different physical connector or a newer PCIe generation must select another drive.

How it compares

Measured against everything we stock in Server & Data Center SSDs, at today’s prices. Recalculated every night.

Price $831.99
Cheaper than about 56% of the 1,039 comparable items (median $992.99).
Total capacity 3.84 TB
Higher than about 60% of the 522 comparable items (median 3.2 TB).
Sequential read speed Up to 3,500 MB/s
Lower than about 58% of the 311 comparable items (median 6,500 MB/s).
Price per TB $216.66 per TB
Cheaper than about 85% of the 522 comparable items (median $595.64 per TB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameMicron
Part numberMTFDHAL3T8TCT
Total capacity3.84 TB
Performance
Sequential read speedUp to 3,500 MB/s
Sequential write speedUp to 3,100 MB/s
Random read (4K)Up to 840,000 IOPS
Random write (4K)Up to 170,000 IOPS
Ports & slots
Interface typePCI-Express 3.0
Power
Active power draw3.3 W
Size & build
Form factor2.5 in U.2
More details
Mean time between failures2,000,000 h

Questions about this item

How much power does the 9200 PRO draw when it runs continuously in a server?

The drive consumes 3.3W during active operation, so a full-day workload adds minimal heat and keeps cooling requirements low.

Does my server need a U.2 backplane and a PCIe 3.0 lane to install this 2.5" SSD?

Yes, the 9200 PRO uses a 2.5" U.2 connector and requires a PCIe 3.0 x4 link; without both the drive cannot communicate with the system.

Will the 3.84TB 9200 PRO work in a chassis that only has older PCIe 2.0 U.2 bays?

The SSD is built for PCIe 3.0; it will fall back to PCIe 2.0 speeds but you lose the 3500 MBps read and 3100 MBps write ceiling.

More in Server & Data Center SSDs

Similar items