We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five copper collet bodies for 1/16 inch TIG torch electrodes

Miller - Weldcraft

Miller - Weldcraft 13N27 Collet Body Copper 1/16 in PK5

SKU CH-6PXY-MXB4A

Copper collet body for 1/16 in electrodes, compatible with multiple TIG torch models, pack of five

  • Product typeTools
  • Copper collet body for TIG welding (GTAW) process
  • Fits 1/16 in electrodes up to .0625 in diameter
  • Compatible with Series 9 and 20 torch models
  • Works with WP-9, WP-20 and HW-9 torch series
  • Pack of 5 bodies for workshop spares

Copper collet body pack for TIG torches

This pack contains five copper collet bodies rated for a maximum electrode diameter of .0625 in. They are built for TIG welding (GTAW) and fit a wide range of Miller and Weldcraft torch models including the 9, 20 and 25 series. Each body is new and ready for workshop or field use.

Suits welders running compatible Miller

These bodies suit operators who need direct replacements for the listed WP-9, WP-20, WP-25, HW-9, HW-20 and HW-25 torch families. They do not suit torches outside the listed model and series range or applications that require a larger electrode capacity than .0625 in.

Maximum electrode diameter .0625 in

The .0625 in limit is the single specification that decides fitment. If your torch and electrode combination exceeds this size, these collet bodies will not work and a larger-bore body is required.

How it compares

Measured against everything we stock in Welding Equipment & Positioners, at today’s prices. Recalculated every night.

Price $23.99
Cheaper than about 70% of the 1,978 comparable items (median $50.99).

Specifications

Product
Brand nameMILLER ELECTRIC
Product typeTools

Questions about this item

How do I fit the 13N27 collet body into a WP-20 series torch, and what step is often missed?

Unscrew the old body, insert the new copper collet body, then tighten the back-cap so the 1/16 in collet seats fully; the missed step is forgetting to match the collet size to the 0.0625 in electrode.

Which consumables wear out first on a WP-9 or WP-20 torch using these 13N27 bodies?

The 1/16 in collets and tungsten electrodes wear out first; the copper collet body lasts much longer unless physically damaged.

What limits continuous TIG welding with the 13N27 on a 250 A water-cooled torch?

The 1/16 in (0.0625 in) maximum electrode diameter caps the usable current well below the torch’s 250 A rating, so electrode overheating appears first.

More in Welding Equipment & Positioners

Similar items