We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vertical 0U power strip with 24 NEMA 5-15R outlets and LCD screen

MINUTEMAN

MINUTEMAN RPM1524N1LCD-IEC PDU Switched 24x5-15R IEC 15A 10ft 0U Vertical

SKU CH-ZF5G-FF13P MPN RPM1524N1LCD-IEC

A switched 0U vertical PDU with 24 NEMA 5-15R outlets, IEC input, 10 ft cord, 15 A rating, local LCD monitoring and IP-addressable remote outlet control

  • Certified standards62368-1 Certification
  • Input current rating15A
  • Input connectionIEC
  • Cord length10 ft (3.05 m)
  • Output outletsFront Panel Receptacles: (24) 5-15 R
  • Maximum output current15A

Model RPM1524N1LCD-IEC

Show 30 more
  • Remote reboot of 24 outlets via single IP address
  • Local LCD shows real-time amps, IP, temperature and humidity
  • 10 ft IEC input cord with 15 A circuit-breaker protection
  • 0U vertical mounting saves rack space for 24 NEMA 5-15R receptacles
  • Built-in web server and SNMP enable browser or network management

Switched PDU with 24 NEMA 5-15R Outlets

This MINUTEMAN RPM1524N1LCD-IEC is a switched power distribution unit built for 0U vertical rack mounting. It delivers 24 front-panel NEMA 5-15R receptacles fed by a 10 ft IEC input cord rated for 15 A maximum current. The integrated LCD shows real-time amperage, IP address, temperature and humidity. Network administrators can control each outlet individually over IP for remote reboot and power sequencing.

Installation and Common Issues

The 0U vertical form factor fits standard rack uprights without consuming rack units, and the 10 ft cord reaches most facility PDUs or UPS outputs. Mounting hardware is included for vertical orientation only. The input circuit breaker provides overload protection but will trip if total draw exceeds 15 A, so verify aggregate load before powering all 24 outlets. Initial network configuration requires a wired Ethernet connection to the 10/100 Base-T port for web or SSH access.

Pre-Order Compatibility Checks

Confirm your rack depth and upright spacing accommodate a full-height 0U vertical chassis. Ensure the upstream power source presents an IEC connector compatible with the unit's input plug and can supply up to 15 A at the required voltage. Verify that connected equipment uses NEMA 5-15P plugs and that combined load stays within the 15 A branch-circuit limit. Network infrastructure must support IPv4 or IPv6 with SNMP v1, v2c or v3 for monitoring integration.

How it compares

Measured against everything we stock in Rackmount PDUs, at today’s prices. Recalculated every night.

Price $1,478.99
Pricier than about 88% of the 643 comparable items (median $451.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameMINUTEMAN
Model nameRPM1524N1LCD-IEC
Product typePower Distribution Units
Design style0U Vertical Installation
Power
Input current rating15A
Input connectionIEC
Output outletsFront Panel Receptacles: (24) 5-15 R
Maximum output current15A
Overload protectionInput Circuit Breaker Protection
Size & build
Cord length10 ft (3.05 m)
Shipping weight6.80 kg
Package size1890 × 221 × 109 mm
Environment & compliance
Certified standards62368-1 Certification

Other versions of this model

5 more in the same range

Questions about this item

How can I confirm the PDU is operating correctly once installed?

The local LCD will show real-time amperage, the assigned IP address, and temperature or humidity readings, while the built-in web server lets you verify each of the 24 outlets responds to on/off commands.

What ships with the unit and what must I source separately?

The package includes the vertical 0U PDU with a 10 ft IEC input cord; you will need to supply a CAT5 network cable for the 10/100 Ethernet port and IEC-compatible upstream power.

Which capacity matches a 15 A single-phase rack circuit?

This model is rated for a maximum input and output current of 15 A and provides 24 NEMA 5-15R receptacles, making it the correct choice for a standard 15 A branch circuit.

More in Rackmount PDUs

Similar items