MINUTEMAN RPM1521E PDU 2-outlet 15A 5-15P
- 62368-1 Certificati…
- 15A
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Eight-outlet PDU with IP-addressable remote on/off control, local LCD monitoring, and 10-foot IEC input cord
Model RPM158N1LCD-IEC
The Minuteman RPM158N1LCD-IEC is a 1U or 0U power distribution unit that provides eight NEMA 5-15R outlets. It supports a maximum load of 12 amps and includes a 15-amp input circuit breaker for overload protection. Network connectivity allows remote on, off, or reset control of each receptacle from a built-in web server.
The unit accepts 100 to 120 VAC through an IEC inlet on a 10-foot cord and is rated for a maximum input current of 15 amps. Total connected equipment must not exceed the 12-amp continuous load limit. The 15-amp breaker protects the PDU and downstream devices from sustained over-current conditions.
Verify that eight 5-15R receptacles match the plug types and quantity required by your rack gear. Confirm that your management platform can use SNMP v1, v2c, or v3, SSH, or a web browser for monitoring and alerts. The LCD shows local amperage, IP address, temperature, and humidity readings without network access.
Measured against everything we stock in Rackmount PDUs, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | MINUTEMAN |
| Model name | RPM158N1LCD-IEC |
| Product type | Power Distribution Units |
| Design style | Horizontal Installation, 0U Vertical Installation |
| Power | |
| Input current rating | 15A |
| Input connection | IEC |
| Output outlets | Rear Panel Receptacles: (8) 5-15R |
| Maximum output current | 15A |
| Overload protection | Input Circuit Breaker Protection |
| Size & build | |
| Cord length | 10 ft (3.05 m) |
| Shipping weight | 3.18 kg |
| Package size | 505 × 211 × 89 mm |
| Environment & compliance | |
| Certified standards | 62368-1 Certification |
Other versions of this model
The unit has a single 12 A maximum load rating and a 15 A input circuit breaker; choose it when your total connected equipment stays at or below 12 A continuous.
It is the continuous current you can draw across all eight NEMA 5-15R outlets combined without tripping the 15 A breaker, so plan your device loads to stay under that 12 A limit.
The IEC inlet connects to a 100-120 VAC source through the 10 ft cord, and the 15 A breaker will trip if total draw exceeds 15 A, while the management firmware enforces the 12 A operational ceiling.
More in Rackmount PDUs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?