Mitsubishi WD-65733-LAMP DLP Replacement Lamp
Original Osram PVIP lamp and housing rated for 6,000 hours at 150-180W 1.0 E22 for Mitsubishi WD-65733 TVs
- Product typeProject Lamp
- Product weight0.999
- Original Osram PVIP lamp delivers reliable brightness for Mitsubishi WD-65733 TV
- 150-180W 1.0 E22 lamp rated for 6000 hours of viewing
- Complete lamp and housing unit installs directly without extra parts
- Industry-leading 240 day warranty backs the replacement lamp
- New condition unit weighs .9990 for secure handling
Direct-fit DLP lamp for WD-65733
This original Osram PVIP lamp and housing assembly is built for the Mitsubishi WD-65733 rear-projection TV. It restores factory brightness and colour accuracy when the original lamp reaches end of life. The unit ships new and ready to install without additional tools.
150-180 W lamp power and 6 000 hour rating
The lamp operates at 150-180 watts with a rated life of 6 000 hours under normal viewing conditions. Power draw stays within the TV's original design envelope so cooling and acoustic performance remain unchanged. No extra ventilation or power-supply changes are required.
Replaces a dim or failed WD-65733 lamp
Owners of the WD-65733 who see reduced brightness, colour shift or a lamp-warning indicator will regain the intended picture quality. The upgrade is not worthwhile if the set shows unrelated faults such as light-engine degradation or colour-wheel noise.
How it compares
Measured against everything we stock in DLP TV Lamps & Bulbs, at today’s prices. Recalculated every night.
- Price $56.99
- Cheaper than about 67% of the 8,306 comparable items (median $97.99).
Specifications
| Product | |
|---|---|
| Brand name | Mitsubishi |
| Model name | WD-65733-LAMP |
| Part number | WD-65733-LAMP |
| Product type | Project Lamp |
Questions about this item
How do I install the lamp and housing into the WD-65733 TV, and which step is often done incorrectly?
Remove the old lamp assembly, align the new housing with the guide rails, and push until the connector seats fully; the step most often missed is not tightening the retaining screw enough to keep the housing flush.
What maintenance or replacement will this 6,000 hour 150-180W 1.0 E22 lamp need later?
The lamp itself is the only consumable; after roughly 6,000 hours of use the brightness drops and the whole lamp-and-housing unit must be swapped again.
What limit appears first when the TV runs continuously at 150-180W?
Sustained operation pushes the lamp toward its 6,000 hour rated life, so gradual lumen depreciation is the first limit you will notice.
More in DLP TV Lamps & Bulbs
Similar items
OSRAM SYLVANIA BP96-00608A dlp replacement lamp
- 100-120 W
- 5,000 h
BenQ EP4227 DLP Replacement Lamp 185 Watt 2,500 Lumens 3,000 Hour
- Project Lamp
OSRAM SYLVANIA LM-500 DLP replacement lamp 100-120W 5000h Hitachi
- 100-120 W
- 5,000 h





