RCA AH16100SR 16-gauge speaker wire 100 ft
- Speaker Wires
- Brass
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
12 AWG two-conductor oxygen-free copper speaker wire with a moisture-resistant polyethylene jacket and water-blocking tape, burial rated for direct outdoor installation in a 1000 ft (304.8 m) spool
This Monoprice Origin Direct Burial Series wire uses a moisture-resistant polyethylene jacket with water-blocking tape for long-term outdoor conductivity. It contains two colour-coded conductors made from 100 percent pure oxygen-free copper. The 1000 ft spool measures 304.8 metres and is finished in grey. Model 121547.
The two-conductor design connects a single speaker per run, making it ideal for residential or commercial landscape audio. Installers needing four-conductor cable for speaker pairs or indoor-only installations should look at something else. Buyers who want pre-terminated ends or a different gauge will need another product.
The tough outer jacket allows the cable to be laid in trenches without conduit, and the colour-coded conductors simplify polarity matching. What usually goes wrong is nicking the inner insulation while stripping the thick polyethylene jacket, which can create a short. Allow enough slack at each end to re-terminate if a conductor is damaged.
Measured against everything we stock in Speaker Wire & Speaker Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Monoprice |
| Model name | 121547 |
| Product type | Others |
| Product color | Gray |
| Ports & slots | |
| Connector count | 2 |
| Connector gender | Male to Male |
The wire uses bare oxygen-free copper conductors with color-coded jackets; you can strip the polyethylene jacket and water-blocking tape, then terminate the strands with standard banana plugs, spade connectors, or direct screw-terminal connections using basic wire strippers.
The moisture-resistant polyethylene jacket and water-blocking tape are designed for direct burial, but electrical codes typically require separation between speaker-level wiring and low-voltage lighting circuits; consult local regulations before sharing a trench.
Measure DC resistance across each conductor pair with a multimeter — 12 AWG oxygen-free copper should read very low ohms per 1000 ft — then play audio and confirm clear, balanced sound from each speaker without hum or signal drop.
More in Speaker Wire & Speaker Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?