We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black metal PSU with 135 mm fan grille and modular cable sockets

Montech

Montech TITAN PLA 1000 1000 W power supply, ATX 3.1, full modular, platinum

SKU CH-68SD-WPHDN MPN TITAN PLA 1000

A full-modular 1000 W ATX 3.1 unit with 80 PLUS Platinum efficiency, a 135 mm FDB fan that stops below 20 % load, and a native 12V-2x6 connector for modern GPUs

  • Max wattage1000 W
  • Modular cablingFull Modular
  • Fan configuration1 × 135 mm
  • Power factor correctionActive
  • Main power connector20+4Pin
  • PSU length limit160 mm

Model ATX 80+ Platinum (1000W)

  • 80 PLUS Platinum certification delivers 90% efficiency at typical loads
  • ATX 3.1 and PCIe 5.1 ready with native 12V-2x6 connector
  • Full modular design uses only the cables your build needs
  • 135 mm FDB fan with Zero Fan mode stays off up to 20% load
  • Hold-up time above 21 ms keeps the system stable during power dips

Platinum Power for High-End Builds

The Montech TITAN PLA 1000 is a 1000 W ATX 3.1 power supply with full modular cabling and 80 PLUS Platinum certification. It targets builders assembling high-performance desktops that demand stable, efficient power delivery. The unit meets modern ATX12V and EPS12V specifications for current platforms.

Native 12V-2x6 and Platinum Efficiency

A single 12V-2x6 PCIe 5.1 connector is included for modern graphics cards alongside three PCIe 6+2 pin cables. The 135 mm FDB fan stays off below 15 to 20 percent load for silent operation. Cybenetics Platinum and Lambda A+ ratings confirm 90 percent efficiency and low noise.

Check Clearance and Connector Counts

The 160 mm depth must fit your case’s PSU chamber. Verify that one 20+4 pin, two CPU 4+4 pin, twelve SATA and four Molex connectors cover every drive and board header in your build. The unit accepts 100 to 240 V input at 50 or 60 Hz.

How it compares

Measured against everything we stock in ATX Desktop Power Supplies, at today’s prices. Recalculated every night.

Price $149.99
Typical for this category: the median of 10,869 items is $142.99.
Max wattage 1000 W
Higher than about 70% of the 930 comparable items (median 850 W).

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameMontech
Model nameTITAN PLA 1000
Product typeATX12 V / EPS12 V
Ports & slots
Connection typesM/B 20+4 Pin: 1
CPU 4+4 Pin: 2
PCIe 6+2 Pin: 3
12 V-2 × 6 PCIe 5.1: 1
SATA: 12
Molex 4 Pin: 4
Power
Max wattage1000 W
Modular cablingFull Modular
Power factor correctionActive
Main power connector20+4Pin
Efficiency certification80 PLUS PLATINUM Certified
Supply voltage100–240 V
AC input frequency50/60 Hz
Rated input current20A@+3.3 V, 20A@+5 V, 83A@+12 V, 0.3A@-12 V, 3A@+5VSB
Size & build
Product dimensions150 × 160 × 86 mm
Shipping weight3.70 kg
Package size338 × 193 × 117 mm
Compatibility
PSU length limit160 mm
Environment & compliance
Regulatory approvalscTUVus / TUV / RCM / CB / CE / UKCA/ CCC / EAC FCC_ICES / BSMI / RoHS / KC_MSIP
More details
Fan configuration1 × 135 mm

Other versions of this model

5 more in the same range

Questions about this item

Will the 135 mm FDB fan need replacement after long-term use?

The fluid-dynamic bearing is rated for extended lifespan and the fan stops completely at loads below 15-20 %, reducing wear during light tasks.

What limit appears first when the 1000 W unit runs at full load continuously?

The +12 V rail is capped at 83 A, so that current ceiling is reached before the overall wattage rating.

How loud and hot does the Platinum unit get during all-day operation?

Cybenetics Lambda A+ certification confirms low noise, while 90 % typical efficiency keeps waste heat low; the fan stays off until roughly 15-20 % load.

More in ATX Desktop Power Supplies

Similar items