Sennheiser SC630Wired single-sided wired headset telephone accessory
- Headset
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
700 mAh 3.6 V Ni-MH replacement battery compatible with Bang & Olufsen BeoCom 1, 6000, M6000 and M6000 MKII cordless telephones
This replacement pack fits the Bang & Olufsen BeoCom 1, BeoCom 6000, BeoCom M6000 and BeoCom M6000 MKII cordless DECT telephones. It replaces original part numbers 3HR-AAAU, 70AAAH3BMXZ and T373. The 700mAh 3.6V Ni-MH chemistry matches the factory specification for these handsets. Buyers needing a different voltage or connector will not be served by this pack.
The pack sits in the standard handset battery compartment and connects with the existing plug. No soldering or tools are required beyond opening the battery door. A common issue is reversed polarity if the connector is forced; align the keyed plug before pressing it home. Users unfamiliar with small connectors should take care not to bend the contact pins.
The 2.52Wh capacity delivers consistent talk and standby time throughout the charge cycle. Ni-MH chemistry maintains a stable voltage under the continuous low-current draw of a DECT handset. The pack does not suffer from the sharp voltage drop seen in some chemistries near empty. Heavy users who leave the handset off the base for days may notice reduced reserve compared to higher-capacity alternatives.
Measured against everything we stock in Headsets, Cords & Phone Mounts, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Product type | Battery |
Place the handset on its charger; the charge indicator should light and the battery should reach full capacity within the normal charge cycle.
The package contains the 700mAh Ni-MH battery pack only; it uses the handset's existing contacts and charges in the original BeoCom base.
All three part numbers refer to the same 3.6V 700mAh pack; any of them will fit the BeoCom 1, 6000, M6000 and M6000 MKII.
More in Headsets, Cords & Phone Mounts
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?