Mueller Industries, Inc. 06114 PVC Sanitary Street Tee trap
PVC Schedule 40 sanitary street tee connects 3-inch hub and spigot fittings for gravity-flow drainage systems
- Product typeDrain Components
- PVC Schedule 40 construction resists corrosion and impact
- Sanitary street tee design connects spigot to dual hub fittings
- Three-inch pipe size fits standard drainage systems
- Operates reliably from minus 20 to 140 degrees Fahrenheit
- Gravity-flow rated for low-pressure waste lines
3 in PVC Sanitary Street Tee
This PVC Schedule 40 sanitary street tee connects three inch pipe in drainage systems. It provides a spigot and two hub sockets for solvent-weld assembly. The fitting is rated for gravity flow at temperatures from minus twenty to one hundred forty degrees Fahrenheit.
Installers running three inch DWV lines
Plumbers needing a compact transition from spigot to dual hub will find the six and three eighths inch overall length practical. Projects requiring a built-in seal or a different pipe diameter should select another fitting.
No seal included in the package
The supplier notes that a seal is not supplied, so the joint must be completed with solvent cement or a separate gasket. This keeps the installation method flexible for local code requirements.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 82% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Mueller Industries |
| Model name | 06114 |
| Product type | Drain Components |
Questions about this item
What pipe size must I already have for this 3 in PVC sanitary street tee to connect?
You need 3 in Schedule 40 PVC pipe with a 3 1/2 in outside diameter to match the hub and spigot ends of this fitting.
Will this Schedule 40 tee work with older Schedule 40 PVC pipe already in the ground?
Yes, it is made for Schedule 40 pipe and the hub and spigot ends accept the same 3 1/2 in outside diameter used on existing Schedule 40 runs.
How can I confirm the joint is sound after I solvent-weld the tee into the line?
Run water through the system and check the three connections for leaks; the fitting is rated for gravity flow from -20 to 140 degrees F.
More in Drain Stoppers, Strainers & Traps
Similar items
Nibco, Inc.
Nibco, Inc. 7073LF-34 90° Elbow Trap 3/4 in C x FNPT Bronze
- Drain Components
- HAWA
$10.99
0.00013463BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00017138BTC
In stock