NEC Display Solutions LT30LP 220W projector lamp
A 220 W replacement lamp module with a new Philips NSH bulb and housing, ready to install and rated for 2 000 hours normal or 5 000 hours economy use
- Power rating220 W
- Lamp lifespan2,000 (Normal) - 5,000 (Economy) Hrs.
- Product typeProjector Lamp
- Ready to install with pre-assembled bulb and housing
- 220W NSH lamp delivers reliable brightness
- Up to 5,000 hours lamp life in economy mode
- 2,000 hours standard life for everyday use
- Manufactured to ISO9001 quality standards
Ready-to-install NEC LT30LP lamp module
This 220 W replacement lamp ships as a complete bulb-and-housing assembly for NEC projectors that use the LT30LP module. It arrives new and fully assembled so you can swap it in without handling a bare burner or aligning reflectors.
Replaces a dim or failed LT30LP module
Swap this unit when the original lamp reaches the end of its 2,000-hour normal-life rating or the 5,000-hour economy rating and image brightness drops below usable levels. The jump is worth it when the projector warns of lamp end-of-life or when colour fidelity and contrast have visibly degraded.
Verify the LT30LP part number on your projector
Confirm the existing module carries the LT30LP designation before ordering, because NEC uses different lamp codes across its range. Also check that the projector’s lamp-hour counter can be reset after installation so the new 2,000-to-5,000-hour cycle is tracked correctly.
How it compares
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
- Price $115.99
- Pricier than about 64% of the 9,513 comparable items (median $99.99).
- Power rating 220 W
- Typical for this category: the median of 8,831 items is 215 W.
Specifications
| Product | |
|---|---|
| Brand name | NEC |
| Product type | Projector Lamp |
| Display | |
| Lamp lifespan | 2,000 (Normal) - 5,000 (Economy) Hrs. |
| Power | |
| Power rating | 220 W |
Questions about this item
Does the LT30LP housing match the original projector mount?
The module is a fully assembled bulb and housing built to the original specifications, so it fits the projector's lamp compartment without modification.
What is the correct way to seat the lamp module, and what step is often missed?
Slide the assembled unit straight into the compartment until the connector engages, then secure the retaining screw; many users forget to tighten that screw.
When should I plan to replace the NSH 220W bulb based on the rated hours?
Expect roughly 2000 hours in normal mode or up to 5000 hours in economy mode before the lamp reaches end of life.
More in Replacement Projector Bulbs
Similar items
Hitachi, Ltd. DT01285 Projector Lamp 245W UHP 2500/4000 Hrs
- 245 W
- 2,500 (Normal) - 4,…
DREAM VISION Dreamweaver 3 OEM Replacement Projector Lamp 250W
- 250 W
- 2,000 Hrs.





