We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 1.5TB 12x128GB DDR5 6400 CL52 1.1V ECC RDIMM Supermicro H14DSG-O-CPU memory upgrade

SKU CH-Q80W-0KQRC

1.5 TB DDR5 6400 ECC registered RDIMM kit with twelve 128 GB modules, CL52 latency and 1.1 V operation, validated for the Supermicro H14DSG-O-CPU motherboard

  • Total capacity1.5 TB (12 × 128 GB)
  • Rated speedDDR5 6400 (PC5 51200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL52
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 5 TB capacity from twelve 128 GB modules for dense server workloads
  • DDR5 6400 speed with CL52 latency delivers rated throughput
  • 1 V registered ECC RDIMM design reduces controller load and corrects errors
  • 288-pin 2Rx4 form factor matches Supermicro H14DSG-O-CPU slot requirements
  • Lifetime replacement warranty with US-based technical support included

Exact-match 1.5 TB DDR5 kit for Supermicro

This 12-module kit delivers 1.5 TB of DDR5 6400 registered ECC memory built for the Supermicro H14DSG-O-CPU motherboard. Each 128 GB RDIMM runs at 1.1 V with CL52 timing and a 2Rx4 organisation. The registered design lets every slot run fully populated at rated speed.

Verify DIMM population rules

Server and motherboard memory support varies by model. Consult the system or motherboard manual for supported capacities, approved DIMM population order, and installation steps before purchase. The 288-pin RDIMM form factor this board requires is not a UDIMM or SODIMM.

Registered ECC design prevents silent data

Registered architecture offloads the memory controller so all twelve slots operate at full capacity, while ECC catches and corrects single-bit errors on the fly. Major OEM Samsung, Micron, or Hynix chips populate modules without heat spreaders. Lifetime replacement warranty and US-based technical support back the kit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $54,927.99
Pricier than about 97% of the 21,161 comparable items (median $397.99).
Total capacity 1.5 TB (12 × 128 GB)
Higher than about 97% of the 20,941 comparable items (median 32 GB).
Price per GB $36.62 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR51200-724K12
Total capacity1.5 TB (12 × 128 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 6400 (PC5 51200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL52
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items1.5 TB 12 × 128 GB DDR5 6400 MHz PC5-51200 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

Does the 1.5TB kit include all 12 modules or do I need to buy extra DIMMs?

The kit contains twelve 128GB DDR5 6400 CL52 1.1V ECC registered RDIMMs, giving the full 1.5TB capacity in one package; no additional modules are required.

Should I choose the 12x128GB kit or a smaller capacity for my Supermicro H14DSG-O-CPU?

The 12x128GB kit matches the board's maximum supported population of twelve 2Rx4 registered DIMMs; select it when you need the full 1.5TB, otherwise pick a smaller kit that follows the same population rules.

Will the DDR5 6400 CL52 rating run at that speed once installed in the H14DSG-O-CPU?

The modules are spec-matched to the motherboard's memory controller, so the kit operates at DDR5 6400 with CL52 timings at 1.1V when populated according to the board's installation guide.

More in Model-Specific Memory Upgrades

Similar items