We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sixteen green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 1.5TB 16x96GB DDR5 5600 CL46 1.1V 2Rx4 ECC RDIMM Kit Supermicro H13SSH

SKU CH-134N-T7C3W

1.5 TB DDR5-5600 ECC RDIMM kit with 16×96 GB modules, CL46, 1.1 V, 2Rx4, validated for Supermicro H13SSH

  • Total capacity1.5 TB (16 × 96 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 5 TB total capacity from 16 matched 96 GB modules
  • DDR5 5600 speed runs at rated PC5-44800 bandwidth
  • Registered ECC design corrects single-bit errors for data integrity
  • 2Rx4 rank layout matches Supermicro H13SSH population rules
  • Low 1.1 V operation reduces server power draw

Exact-match DDR5 upgrade

This 1.5 TB kit contains 16 modules of 96 GB each, built as 288-pin DDR5 RDIMMs with ECC and registered buffering. It runs at 5600 MT/s (PC5-44800) with CL46 latency at 1.1 V and a 2Rx4 rank layout. The specification matches the Supermicro H13SSH motherboard so the controller recognises the full capacity and operates at rated speed.

Registered ECC replaces unbuffered DIMMs

The registered architecture offloads the memory controller, allowing every slot to be populated at full capacity while ECC corrects single-bit errors on the fly. This jump is worth it when a server needs maximum density and data integrity without unplanned reboots caused by silent corruption. Builders using unbuffered UDIMMs or SODIMMs cannot use this kit because the form factor and electrical interface differ.

DDR5 platform constraint

DDR5 RDIMMs require a motherboard that supports the 288-pin registered interface and the specific population rules of the H13SSH. If the board or BIOS does not validate this exact rank, voltage and timing combination, the modules will not train at 5600 MT/s. Always consult the system manual for approved DIMM order and maximum supported capacity before installation.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $42,640.99
Pricier than about 95% of the 21,161 comparable items (median $397.99).
Total capacity 1.5 TB (16 × 96 GB)
Higher than about 97% of the 20,941 comparable items (median 32 GB).
Price per GB $28.43 per GB
Pricier than about 80% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K16
Total capacity1.5 TB (16 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items1.5 TB 16 × 96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

Will these 288-pin DDR5 RDIMMs fit the DIMM slots on my Supermicro H13SSH motherboard?

Yes, the 288-pin RDIMM form factor matches the slots on the Supermicro H13SSH. The kit is spec-matched to that board's memory population rules and registered architecture.

What is the correct installation order for the 16 modules in this 1.5TB kit?

Install the 16 modules following the population sequence in the Supermicro H13SSH manual. The step often missed is using the exact slot order the board requires for full 1.5TB recognition at DDR5-5600.

Do the modules in this 1.5TB kit need any firmware updates or battery replacements over time?

No firmware updates or battery replacements are required for these DDR5 RDIMMs. ECC corrects single-bit errors automatically, and the registered design maintains signal integrity across all 16 slots for the module lifespan.

More in Model-Specific Memory Upgrades

Similar items