We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sixteen green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 1.5TB (16x96GB) DDR5 5600MHz CL46 2Rx4 ECC RDIMM Dell PowerEdge XE9780L/XE9785L memory upgrade

SKU CH-RAV4-7NF06

A 1.5 TB DDR5 ECC RDIMM kit with 16 modules of 96 GB each, running at 5600 MHz with CL46 latency for Dell PowerEdge XE9780L and XE9785L servers

  • Total capacity1.5 TB (16 × 96 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Buffer typeRegistered
  • Rated voltage1.1 V
  • Massive 1.5 TB capacity from 16 modules of 96 GB each
  • DDR5 5600 MHz speed rated PC5-44800 for high throughput
  • ECC registered 2Rx4 design protects data integrity in servers
  • Low 1.10 V operation reduces power draw per module
  • 288-pin RDIMM form factor fits Dell PowerEdge XE9780L and XE9785L

Server memory kit for Dell PowerEdge XE9780L

This 1.5TB kit contains sixteen 96GB DDR5 RDIMMs built for Dell PowerEdge XE9780L and XE9785L rack servers. It targets administrators who need maximum registered ECC capacity in those specific platforms. Buyers with other server models or workstations should verify compatibility before ordering.

Registered ECC modules with 2Rx4 organisation

Each module uses a 288-pin DDR5 RDIMM form factor with a 2Rx4 rank layout and on-die ECC. The registered buffer reduces electrical load on the memory controller, allowing all sixteen slots to be populated at the rated 5600 MT/s. No heat spreaders are fitted, so airflow in the server chassis must be sufficient for dense configurations.

5600 MT/s CL46 at 1.1 V

The kit runs at DDR5-5600 (PC5-44800) with a CAS latency of 46 cycles at the standard 1.1 V. This speed and latency combination determines whether the memory matches the platform's supported profile and the workload's bandwidth requirements.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $41,762.99
Pricier than about 95% of the 21,161 comparable items (median $397.99).
Total capacity 1.5 TB (16 × 96 GB)
Higher than about 97% of the 20,941 comparable items (median 32 GB).
Price per GB $27.84 per GB
Pricier than about 78% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K16
Total capacity1.5 TB (16 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank2Rx4
Power
Rated voltage1.1 V
Compatibility
Compatible systemsDell
In the box
Included items1.5 TB (16 × 96 GB) DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

Does DDR5 5600MHz PC5-44800 CL46 run at the rated 5600 MT/s in a Dell PowerEdge XE9780L?

The kit is specified as DDR5 5600 (PC5-44800) with CL46; the server's memory controller will operate the modules at up to 5600 MT/s when populated per Dell's validated configuration.

What physical slot and form factor do the 96GB 2Rx4 modules require?

Each module is a 288-pin DDR5 RDIMM measuring standard RDIMM height; the XE9780L and XE9785L provide 288-pin DDR5 RDIMM slots that accept this form factor.

How are the 16 modules installed, and which step is commonly missed?

Power down the rack server, open the chassis, populate all 16 slots following Dell's prescribed slot sequence for 1.5TB, then press each RDIMM firmly until the ejector clips lock — the step often missed is verifying the clips fully engage on both sides.

More in Model-Specific Memory Upgrades

Similar items