We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sixteen green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 1.5TB 16x96GB DDR5 6400MHz CL52 1.1V 2Rx4 ECC RDIMM Kit Supermicro H14DST-FL memory upgrade

SKU CH-A30M-PJPFX

1.5 TB DDR5 ECC RDIMM kit with 16 modules of 96 GB at 6400 MHz CL52 1.1 V 2Rx4 registered for Supermicro H14DST-FL

  • Total capacity1.5 TB (16 × 96 GB)
  • Rated speedDDR5 6400 (PC5 51200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL52
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 5 TB total capacity from sixteen 96 GB modules
  • DDR5 6400 speed with CL52 latency for rated throughput
  • Registered ECC design corrects errors and supports full population
  • 1 V operation matches the Supermicro H14DST-FL memory controller
  • 288-pin RDIMM form factor fits the board's DIMM slots exactly

1.5TB DDR5 ECC RDIMM Kit for Supermicro H14DST-FL

This 1.5TB kit contains sixteen 96GB DDR5 6400MHz Registered ECC RDIMMs. It operates at 1.1V with CL52 latency and a 2Rx4 rank structure. The 288-pin modules are built with major OEM chips for the Supermicro H14DST-FL motherboard.

Suited For Full-Population Server Builds Only

This kit suits administrators upgrading a Supermicro H14DST-FL to its maximum supported capacity with registered ECC memory. It is not for systems requiring unbuffered UDIMMs, SODIMM form factors, non-ECC memory, or kits with fewer than sixteen modules.

2Rx4 Registered ECC Architecture Decides

The 2Rx4 registered ECC design offloads the memory controller to support full-slot population at rated speed. Verify your motherboard manual confirms support for this specific rank, voltage, and registered DIMM type before installation.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $49,800.99
Pricier than about 96% of the 21,161 comparable items (median $397.99).
Total capacity 1.5 TB (16 × 96 GB)
Higher than about 97% of the 20,941 comparable items (median 32 GB).
Price per GB $33.20 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR51200-9624K16
Total capacity1.5 TB (16 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 6400 (PC5 51200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL52
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items1.5 TB 16 × 96 GB DDR5 6400 MHz PC5-51200 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

How do I install the 16 DDR5 288-pin RDIMM modules in the Supermicro H14DST-FL and what step is commonly missed?

Power down, open the chassis, and insert each 96 GB module into the slots specified by the motherboard manual’s population order; the step most often missed is following that exact sequence so all 16 modules are recognised at 6400 MHz.

What maintenance or replacement will the 1.5 TB DDR5 ECC RDIMM kit need over its service life?

No routine maintenance is required; the modules have no heat spreaders or moving parts, and ECC corrects single-bit errors automatically, so replacement only occurs if a module fails and the lifetime warranty covers it.

What limit appears first when the 16x96 GB DDR5 6400 CL52 kit runs sustained workloads on the H14DST-FL?

The memory controller’s maximum supported capacity and rank-per-channel limit for 2Rx4 registered DIMMs is reached first; once all 16 slots are populated at 1.1 V, you cannot add more memory without changing the platform.

More in Model-Specific Memory Upgrades

Similar items