We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 1.5TB DDR5 5600 ECC RDIMM 16x96GB CL46 Supermicro H14SST-G memory upgrade

SKU CH-QJKN-QX3HV

1.5 TB DDR5 5600 ECC RDIMM kit with 16×96 GB modules at CL46 and 1.1 V for Supermicro H14SST-G

  • Total capacity1.5 TB (16 × 96 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 5 TB total capacity from 16 modules of 96 GB each
  • DDR5 5600 speed with CL46 latency for rated server performance
  • 1 V operation meets the board's voltage spec exactly
  • Registered ECC design corrects single-bit errors under full load
  • 288-pin RDIMM form factor matches the Supermicro H14SST-G slots

Exact-match server upgrade

This 1.5TB kit contains 16 DDR5 5600 RDIMM modules, each 96GB, built to the Supermicro H14SST-G memory specification. Registered ECC architecture with 2Rx4 organisation lets every slot run fully populated at rated speed. CL46 timing and 1.1V operation match the controller defaults for stable production workloads.

Verify population rules first

Consult the motherboard manual for supported capacities per channel, approved DIMM installation order, and any BIOS version requirements before ordering. The board demands 288-pin Registered RDIMMs; UDIMM or SODIMM modules will not fit or function. Confirm your chassis has 16 available slots and adequate airflow for a full load.

Thermals noise and power

Bare modules without heat spreaders rely on directed chassis airflow to stay within thermal limits. Registered buffering reduces electrical load on the memory controller, keeping per-module power draw low at 1.1V. Expect silent operation as there are no active cooling components on the DIMMs themselves.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $42,845.99
Pricier than about 95% of the 21,161 comparable items (median $397.99).
Total capacity 1.5 TB (16 × 96 GB)
Higher than about 97% of the 20,941 comparable items (median 32 GB).
Price per GB $28.56 per GB
Pricier than about 80% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K16
Total capacity1.5 TB (16 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items1.5 TB 16 × 96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

What comes in the box and is anything else needed for installation?

The kit contains sixteen 96 GB DDR5 5600 registered ECC RDIMMs for a total of 1.5 TB. No additional memory parts are required; only the Supermicro H14SST-G motherboard and its manual for the correct population order.

How do I decide between the available capacities or speeds for this server?

This is a single 1.5 TB kit running at DDR5 5600 with CL46 timing. Choose it when your H14SST-G configuration calls for the maximum supported capacity at the board's rated speed.

What does the DDR5 5600 rating mean once the modules are installed in the H14SST-G?

The memory will operate at 5600 MT/s with 1.1 V and CL46 latency, delivering the full PC5-44800 bandwidth the motherboard's memory controller expects when all sixteen slots are populated.

More in Model-Specific Memory Upgrades

Similar items