We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green 288-pin DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 128GB (2x64GB) DDR5 4800 ECC RDIMM memory upgrade for Cisco UCS X210c M7

SKU CH-ED3E-7JQWJ

A 128 GB registered DDR5 kit with ECC, two 64 GB modules at 4800 MT/s and CL40, validated for the Cisco UCS X210c M7 compute node

  • Total capacity128 GB (2 × 64 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Buffer typeRegistered
  • Rated voltage1.1 V
  • 128GB total capacity for large workloads with two 64GB modules
  • DDR5 4800 speed provides high bandwidth for server tasks
  • ECC registered design detects and corrects data errors
  • 1V operation reduces power draw in dense configurations
  • Validated for Cisco UCS X210c M7 compute node compatibility

Server Memory Kit

This NEMIX RAM kit delivers 128GB of DDR5 ECC registered memory in two 64GB modules. It is built for the Cisco UCS X210c M7 compute node and suits administrators who need validated capacity for virtualisation or database workloads. The registered design adds signal integrity for multi-DIMM server boards.

Thermals and Power

Modules run at 1.10V with a CL40 latency profile and no heat spreader installed. The low-voltage DDR5 architecture reduces power draw compared with previous server memory generations. Passive cooling relies on chassis airflow across the bare PCB, so adequate case ventilation is required for sustained loads.

Build and Connectors

Each 288-pin RDIMM uses a 2Rx4 organisation sourced from major OEM Samsung, Micron or Hynix die. The kit targets the Cisco UCS X210c M7 memory slots directly and is not intended for desktop or unbuffered platforms. Buyers who need non-ECC memory or consumer motherboard compatibility should look elsewhere.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $3,160.99
Pricier than about 73% of the 21,161 comparable items (median $397.99).
Total capacity 128 GB (2 × 64 GB)
Higher than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $24.70 per GB
Pricier than about 69% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineCisco Server Compatible Series Memory
Model nameCisco DDR5 4800 MHz ECC RDIMM Registered Server Memory
Part numberMR38400-924K2
Total capacity128 GB (2 × 64 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank2Rx4
Power
Rated voltage1.1 V
Compatibility
Compatible systemsCisco
In the box
Included items128 GB (2 × 64 GB) DDR5 4800 MHz PC5-38400 2Rx4 1.1 V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

How do I install the 288-pin DDR5 RDIMM modules into the Cisco UCS X210c M7 compute node and which step is commonly missed?

Power down the node, open the chassis, align the notch on each 64 GB module with the slot key, press firmly until both side clips click, then verify in BIOS that all 128 GB are detected at 4800 MT/s; the step often missed is seating both clips fully so the register engages.

What maintenance or replacement will the 2Rx4 ECC registered kit need during its service life?

The modules have no heat spreaders and no moving parts, so no routine maintenance is required; replacement only occurs if a module fails, which is covered by the manufacturer’s lifetime replacement warranty.

What limit appears first when the 1.1 V CL40 kit runs sustained workloads in the Cisco UCS X210c M7?

The primary limit is the DDR5 4800 MT/s data rate and CL40 latency ceiling; thermals are secondary because the registered design and 1.1 V operation keep temperatures within spec without active cooling.

More in Model-Specific Memory Upgrades

Similar items