We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR4 RDIMM sticks with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR4 2400 CL17 ECC RDIMM Dell PowerEdge FC430 memory upgrade

SKU CH-TSYP-4GMWC

128 GB DDR4 ECC registered server kit with four 32 GB modules at 2400 MHz CL17 for Dell PowerEdge FC430

  • Total capacity128 GB (4 × 32 GB)
  • Rated speedDDR4 2400 (PC4 19200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL17
  • Buffer typeRegistered
  • Rated voltage1.2 V
  • 128GB total capacity from four 32GB modules
  • ECC registered design protects data integrity in servers
  • DDR4 2400 CL17 timing balances speed and latency
  • 2V operation reduces power draw per module
  • 288-pin RDIMM form factor fits Dell PowerEdge FC430

Dell PowerEdge FC430 memory kit

This 128GB kit contains four 32GB DDR4 ECC RDIMM modules built for the Dell PowerEdge FC430 server. Registered buffering and error correction protect data integrity in virtualised workloads and database services. The dual-rank 2Rx4 organisation suits the platform’s memory controller. Buyers needing higher capacities per slot or non-ECC memory for desktop boards cannot use this kit.

Sustained load behaviour

Rated at DDR4 2400 with CL17 latency, the modules maintain stable throughput during long compute runs and heavy virtualisation duty. ECC detection corrects single-bit errors without halting the system. Registered signalling reduces electrical load on the memory bus at full population. Workloads demanding DDR4 2666 or higher transfer rates will run at the lower 2400 speed.

Thermals noise and power

Operating at 1.20V, the bare modules draw modest power and produce minimal heat inside the server chassis. No heat spreaders are fitted; cooling relies on the system’s directed airflow. Silent operation is inherited from the host fans. Builds requiring active module cooling or lower-voltage 1.1V operation must look elsewhere.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $721.99
Pricier than about 56% of the 21,161 comparable items (median $397.99).
Total capacity 128 GB (4 × 32 GB)
Higher than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $5.64 per GB
Cheaper than about 69% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineDell Server/Workstation Compatible Series Memory
Model nameDell DDR4 2666 MHz ECC RDIMM Registered Server Memory
Part numberMR19200-324K4
Total capacity128 GB (4 × 32 GB)
Product type288-Pin DDR4 RDIMM
Performance
Rated speedDDR4 2400 (PC4 19200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL17
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank2Rx4
Power
Rated voltage1.2 V
Compatibility
Compatible systemsDell
In the box
Included items128 GB (4 × 32 GB) DDR4 2400 MHz PC4-19200 2Rx4 1.2 V CL17 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Does the 1.2 V DDR4 2400 kit add noticeable heat or power draw when the FC430 runs 24/7?

Each 32 GB RDIMM operates at the standard 1.20 V DDR4 voltage, so the four-module kit draws no more power than the server's stock memory and produces only typical DDR4 thermals under continuous load.

What must the Dell PowerEdge FC430 already have to accept this 288-pin registered ECC kit?

The FC430 needs free DDR4 RDIMM slots and a BIOS that supports registered ECC modules; the kit plugs directly into the server's standard 288-pin memory sockets.

Can the CL17 2400 MHz modules run alongside any older 2666 MHz sticks still in the FC430?

The server will clock all installed memory to the lowest common speed, so mixing these 2400 MHz RDIMMs with 2666 MHz modules forces the faster sticks down to 2400 MHz.

More in Model-Specific Memory Upgrades

Similar items