We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR4 3200 CL22 ECC UDIMM for THINKMATE XF4-14E3

SKU CH-TFYD-KJTED

128GB DDR4 3200 ECC UDIMM kit with four 32GB modules at CL22 for Thinkmate XF4-14E3 workstations

  • Total capacity128 GB (4 × 32 GB)
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • 128GB total capacity across four 32GB modules
  • DDR4 3200 speed with PC4-25600 bandwidth rating
  • ECC unbuffered design detects and corrects data errors
  • CL22 CAS latency at 1.20V operating voltage
  • 288-pin UDIMM form factor validated for ThinkMate XF4-14E3

128GB ECC UDIMM Kit for Thinkmate XF4-14E3

This 128GB kit contains four 32GB DDR4 3200 modules built for the Thinkmate XF4-14E3 workstation. It delivers ECC error correction on an unbuffered 288-pin UDIMM form factor. The kit suits IT professionals and workstation users who need maximum registered capacity for data-integrity workloads.

Tool-free DIMM installation with ECC verification

Installation follows standard UDIMM procedure: power down, open the chassis, seat each 288-pin module until the retention clips engage, then power on. The motherboard must enable ECC in BIOS for error correction to function; otherwise the system will treat the memory as non-ECC. Mixing these 2Rx8 modules with existing sticks of different rank or speed can prevent the system from posting.

Verify motherboard slot count and ECC support

Confirm the Thinkmate XF4-14E3 has four available DDR4 UDIMM slots before ordering. The platform must support unbuffered ECC DDR4 at 1.2V and 3200 MT/s to run this kit at its rated CL22 timing. If the board limits memory speed or requires registered DIMMs, the modules will not operate correctly.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $843.99
Pricier than about 59% of the 21,161 comparable items (median $397.99).
Total capacity 128 GB (4 × 32 GB)
Higher than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $6.59 per GB
Cheaper than about 60% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineTHINKMATE Server/Workstation Compatible Series Memory
Model nameTHINKMATE DDR4 3200 MHz ECC Unbuffered UDIMM
Part numberME25600-328K4
Total capacity128 GB (4 × 32 GB)
Product type288-Pin DDR4 ECC UDIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportYes
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsTHINKMATE
In the box
Included items128 GB (4 × 32 GB) DDR4 3200 MHz PC4-25600 2Rx8 1.2 V CL22 288-PIN ECC Unbuffered UDIMM KIT

Questions about this item

How can I confirm the 128GB kit is running at DDR4 3200 CL22 after installation?

Enter the BIOS or use a tool such as CPU-Z to verify the memory reports 3200 MT/s, CL22 timings, 1.20 V and 128 GB total across all four slots.

What does the package contain and is anything else required?

The box includes the 4×32 GB DDR4 3200 ECC UDIMM kit (part ME25600-328K4); no extra cables, brackets or software are needed for installation.

Which capacity or version should I choose for the THINKMATE XF4-14E3?

This 128 GB (4×32 GB) DDR4 3200 CL22 ECC UDIMM kit is the exact configuration validated for the XF4-14E3 workstation.

More in Model-Specific Memory Upgrades

Similar items