We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR4 RDIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR4 3200 ECC RDIMM CL22 2Rx8 1.2V THINKMATE Server Memory Upgrade

SKU CH-0FQV-1E0B0

128GB quad-channel DDR4-3200 ECC registered kit with CL22 latency and 1.2V operation for Thinkmate rackmount servers

  • Total capacity128 GB (4 × 32 GB)
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeRegistered
  • Rated voltage1.2 V
  • 128 GB kit expands server capacity
  • DDR4 3200 speed handles heavy workloads
  • ECC registered design protects data integrity
  • 2 V operation reduces power draw
  • Validated for ThinkMate rackmount servers

128GB DDR4 3200 ECC RDIMM Kit

This NEMIX RAM kit provides 128GB across four 32GB registered DDR4 modules running at 3200MHz with CL22 latency. It uses 2Rx8 organisation, operates at 1.2V, and includes ECC error correction for data integrity. The 288-pin RDIMMs are validated for specific Thinkmate rackmount server models listed in the compatibility data.

Suits Thinkmate RAX and XS Series Servers

IT administrators upgrading Thinkmate RAX-XN24, XS4, XT10, XS8, XH8, XH10, XH12, XT24 or S3 systems can install this memory directly. Builders using consumer motherboards, non-ECC platforms, or servers requiring different rank configurations or voltage levels should select alternative modules.

Registered ECC with 2Rx8 Rank Architecture

The registered buffer and 2Rx8 rank structure determine electrical loading on the server memory bus. This specification must match the platform memory controller requirements exactly; systems needing unbuffered UDIMMs, different rank counts, or non-ECC operation cannot use this kit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,175.99
Pricier than about 62% of the 21,161 comparable items (median $397.99).
Total capacity 128 GB (4 × 32 GB)
Higher than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $9.19 per GB
Typical for this category: the median of 20,941 items is $8.19 per GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineTHINKMATE Server/Workstation Compatible Series Memory
Model nameTHINKMATE DDR4 3200 MHz ECC RDIMM Registered Server Memory
Part numberMR25600-328K4
Total capacity128 GB (4 × 32 GB)
Product type288-Pin DDR4 RDIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsTHINKMATE
In the box
Included items128 GB (4 × 32 GB) DDR4 3200 MHz PC4-25600 2Rx8 1.2 V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Does the CL22 latency become a bottleneck during sustained workloads on this DDR4 3200 kit?

CAS latency 22 is the rated timing for DDR4 3200 operation. ECC registered modules add one cycle for error correction, so sustained throughput follows the JEDEC specification for PC4-25600.

What thermal or power behaviour should I expect when all four 32 GB modules run continuously in a Thinkmate rackmount server?

Each module operates at 1.20 V with no heat spreader. Registered ECC RDIMMs draw slightly more power than unbuffered DIMMs, but total consumption stays within standard DDR4 limits for 288-pin server memory.

Which Thinkmate server models must I already own for this 4 x 32 GB kit to be compatible?

The kit is validated for Thinkmate RAX-XN24, XS4, XT10, XS8, XH8, XH10, XH12, XT24 and S3 rackmount servers. A matching DDR4 RDIMM slot population is required.

More in Model-Specific Memory Upgrades

Similar items