NEMIX RAM 128GB (4x32GB) DDR4 3200MHz CL22 ECC RDIMM Tyan Transport CX GC68A-B8036

Capacity and Configuration

This kit provides 128GB of DDR4 memory across four 32GB modules. It is built for the Tyan Transport CX GC68A-B8036 server or workstation platform. The registered ECC design targets systems that require error correction and signal buffering for stable operation under continuous load. Buyers needing non-ECC or unbuffered memory for consumer desktops should look elsewhere.

DDR4 3200 Interface Limits

The modules run at DDR4 3200 (PC4-25600) with a CAS latency of 22 at 1.20V. Registered DIMMs add one clock cycle of address/command buffering, so the memory controller must support registered operation. The 2Rx8 organisation means each module presents two ranks per channel; the platform must accommodate the resulting electrical loading. Systems limited to lower DDR4 speeds or unbuffered DIMMs cannot use this kit.

Pre-Installation Checks

Confirm the motherboard is the exact Tyan Transport CX GC68A-B8036 model and that its firmware revision supports 32GB registered ECC RDIMMs at 3200 MT/s. Verify all four DIMM slots are free and that the CPU installed provides enough memory channels for the desired configuration. Ensure the chassis airflow can cool modules without heat spreaders. This kit is not compatible with laptops, NUCs, or consumer motherboards that lack registered ECC support.