We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green circuit boards with black chips, no heat spreaders, 288-pin DDR5 ECC UDIMM form factor

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR5 4800 CL40 ECC UDIMM Dell PowerEdge R360

SKU CH-SS2A-6P01Z

A 128 GB kit of four 32 GB DDR5 4800 ECC unbuffered UDIMMs validated for Dell PowerEdge R360 servers

  • Total capacity128 GB (4 × 32 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Buffer typeUnbuffered
  • Rated voltage1.1 V
  • 128 GB kit expands server memory capacity for demanding workloads
  • DDR5 4800 speed delivers high bandwidth for data-intensive applications
  • ECC protection detects and corrects memory errors to maintain data integrity
  • 1 V operation reduces power draw compared to previous DDR generations
  • Validated for Dell PowerEdge R360 ensuring reliable compatibility

Dell PowerEdge R360 compatible 128 GB kit

This 128 GB kit contains four 32 GB DDR5 4800 ECC unbuffered UDIMMs built for the Dell PowerEdge R360 rack server. IT professionals who need verified compatibility for mission-critical workloads can install the matched set with confidence. The modules operate at 1.1 V and carry a CL40 latency rating. They are designed to meet the stability demands of enterprise environments.

Sustained-load behaviour with ECC unbuffered DDR5

Error-correcting code detects and corrects single-bit errors during continuous operation, helping prevent data corruption in long-running server tasks. The unbuffered design connects directly to the memory controller without a register, which keeps latency low for the supported platform. Modules use major OEM chips from Samsung, Micron or Hynix and are stress-tested under load before shipment. This combination supports reliable throughput for database, virtualization and file-service workloads.

Verify your PowerEdge R360 memory configuration

Confirm the server accepts 288-pin DDR5 ECC UDIMMs and that four slots are available for a 4 x 32 GB population. Check the system documentation for maximum supported capacity per slot and any rank or speed limitations that apply to the R360. Ensure the BIOS is current enough to recognise DDR5 4800 modules at 1.1 V. The kit includes no heat spreaders, so airflow across the DIMM area must be adequate.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,634.99
Pricier than about 71% of the 21,161 comparable items (median $397.99).
Total capacity 128 GB (4 × 32 GB)
Higher than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $20.59 per GB
Pricier than about 66% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineDell Server/Workstation Compatible Series Memory
Model nameDell DDR5 4800 MHz ECC Unbuffered UDIMM
Part numberME38400-328K4
Total capacity128 GB (4 × 32 GB)
Product type288-Pin DDR5 ECC UDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsDell
In the box
Included items128 GB (4 × 32 GB) DDR5 4800 MHz PC5-38400 2Rx8 1.1 V CL40 288-PIN ECC Unbuffered UDIMM KIT

Questions about this item

How much power does the 1.1 V DDR5 4800 kit draw when the server runs continuously?

Each module operates at 1.10 V, the standard DDR5 voltage, so total power scales with the four 32 GB sticks installed.

What must the Dell PowerEdge R360 already have to accept this 288-pin ECC UDIMM kit?

The R360 needs free UDIMM slots that support DDR5 4800 ECC unbuffered memory and a BIOS that recognises 2Rx8 organisation.

Will the CL40 2Rx8 modules work alongside any original DDR5 4800 sticks still in the R360?

Yes, if the existing memory is also DDR5 4800 ECC unbuffered, the server will run all modules at the common 4800 speed and CL40 latency.

More in Model-Specific Memory Upgrades

Similar items