We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 UDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR5 5600 CL46 1.1V 2Rx8 UDIMM ASRock IMB-A1302 IMB-A1700 memory upgrade

SKU CH-P10N-07DR7

128 GB DDR5 kit with four 32 GB modules running at 5600 MHz CL46 for ASRock IMB-A1302 and IMB-A1700 motherboards

  • Total capacity128 GB (4 × 32 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Buffer typeUnbuffered
  • Rated voltage1.1 V
  • 128GB total capacity across four 32GB modules
  • DDR5 5600 speed for responsive system performance
  • Low 1.1V operating voltage reduces power draw
  • CL46 latency tuned for stable operation
  • Validated for ASRock IMB-A1302 and IMB-A1700 motherboards

Targeted ASRock IMB-A1302 IMB-A1700 Upgrade

This 128GB kit contains four 32GB DDR5 5600 UDIMMs built for ASRock Industrial Micro-ATX motherboards IMB-A1302 and IMB-A1700. Each module runs at 1.1V with CL46 timings and a 2Rx8 organisation. The kit delivers 128GB total capacity in a 288-pin unbuffered non-ECC format.

Suitable for Industrial ASRock Systems Only

The memory is validated for the two listed ASRock Industrial boards and will not suit other platforms. Builders needing ECC error correction, registered modules, lower latency profiles, different voltages or capacities outside 128GB should look elsewhere. Systems requiring heat spreaders or alternative form factors are also not addressed by this kit.

128GB (4x32GB) DDR5 5600 CL46 1.1V 2Rx8 UDIMM

The single specification that decides compatibility is the exact 128GB (4x32GB) DDR5 5600 CL46 1.1V 2Rx8 288-pin unbuffered non-ECC UDIMM configuration matched to ASRock IMB-A1302 and IMB-A1700 motherboards. Only systems accepting this precise combination can use the kit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,950.99
Pricier than about 68% of the 21,161 comparable items (median $397.99).
Total capacity 128 GB (4 × 32 GB)
Higher than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $15.24 per GB
Pricier than about 61% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-328K4
Total capacity128 GB (4 × 32 GB)
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsASRock Industrial
In the box
Included items128 GB (4 × 32 GB) DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT

Questions about this item

Do I need an ASRock IMB-A1302 or IMB-A1700 motherboard to use this 128GB DDR5 5600 kit?

Yes, the kit is validated for those two ASRock Industrial Micro-ATX boards; other platforms are not guaranteed.

Can I mix these 2Rx8 DDR5 5600 modules with slower DDR5 sticks already in the system?

The board will run all modules at the speed of the slowest installed kit, so faster modules will downclock to match.

How can I verify the memory is running at 5600 MT/s with CL46 after installation?

Check the memory tab in CPU-Z or the BIOS main screen; both should report 5600 MT/s and CL46 timings.

More in Model-Specific Memory Upgrades

Similar items