We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 128GB (8x16GB) DDR5 4800 CL40 ECC RDIMM Tyan FT65T-B8050 memory upgrade

SKU CH-7P67-PX1Q6

A 128 GB registered DDR5 kit of eight 16 GB modules running at 4800 MT/s with CL40 latency and ECC for Tyan FT65T-B8050 servers

  • Total capacity128 GB (8 × 16 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Buffer typeRegistered
  • Rated voltage1.1 V
  • 128 GB total capacity with eight 16 GB modules
  • DDR5 4800 MT/s speed for high-throughput server workloads
  • ECC registered design detects and corrects single-bit errors
  • 1 V operating voltage reduces power draw per module
  • Validated for Tyan Transport HX FT65T-B8050 motherboard

128GB DDR5 ECC RDIMM kit for Tyan FT65T-B8050

This 128GB kit contains eight 16GB DDR5 4800 registered DIMMs built for the Tyan Transport HX FT65T-B8050 server platform. Each module runs at 1.1V with CL40 latency and provides error-correcting code protection for data integrity. The 288-pin RDIMMs use major OEM chips from Samsung, Micron or Hynix and are validated for registered server workloads.

Suited for admins expanding FT65T-B8050 memory

IT teams managing Tyan Transport HX FT65T-B8050 servers who need the full 128GB registered ECC configuration will match the platform's qualified memory list. Builders requiring non-ECC unbuffered DIMMs, lower-density modules or a different DDR generation should look elsewhere because this kit is specific to registered DDR5 4800 operation on that motherboard.

Straightforward DIMM installation

Power down the system, open the chassis and seat each 288-pin RDIMM into the appropriate slots following the FT65T-B8050 population guide. The modules have no heat spreaders, so clearance is minimal, but forced-air server airflow must reach the sticks. The most common issue is populating slots in the wrong order, which can prevent the system from posting or force it to run at reduced speed.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $3,778.99
Pricier than about 76% of the 21,161 comparable items (median $397.99).
Total capacity 128 GB (8 × 16 GB)
Higher than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $29.52 per GB
Pricier than about 84% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineTyan Server/Workstation Motherboard Compatible Series Memory
Model nameTyan DDR5 4800 MHz ECC RDIMM Registered Server Memory
Part numberMR38400-618K8
Total capacity128 GB (8 × 16 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsTyan
In the box
Included items128 GB (8 × 16 GB) DDR5 4800 MHz PC5-38400 1Rx8 1.1 V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

What motherboard is this 128GB DDR5 4800 ECC RDIMM kit validated for?

This kit is qualified for the Tyan Transport HX FT65T-B8050 server board.

Can I mix these 1Rx8 CL40 modules with existing DDR5 4800 RDIMMs of a different rank?

Mixing ranks on the same channel can prevent the system from training at 4800 MT/s; populate each channel with identical 1Rx8 modules for stable operation.

How do I confirm the 128GB kit is running at 4800 MT/s with ECC active after installation?

Check the BIOS memory information screen for 4800 MT/s speed, CL40 timings, 1.10 V voltage and ECC status showing enabled.

More in Model-Specific Memory Upgrades

Similar items