Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A single 128 GB DDR4 3200 registered ECC module built for Supermicro servers
This 128GB DDR4 3200 registered DIMM adds ECC-protected capacity to compatible Supermicro servers and workstations. It operates at 1.2V with CL22 latency and a 4Rx4 organisation. The module uses major-brand Samsung, Micron or Hynix chips and carries part number MR25600-744K1.
Swapping smaller registered modules for this single 128GB stick raises total memory without occupying additional slots. The upgrade is worthwhile when workloads exceed the current limit and the platform supports 4Rx4 registered DIMMs at 3200MT/s.
The 288-pin form factor installs directly into registered DDR4 channels on supported Supermicro motherboards. ECC and register logic maintain signal integrity at high density, freeing remaining slots for future expansion. No heat spreader is included.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | SuperMicro Server/Workstation Compatible Series Memory |
| Model name | SuperMicro DDR4 3200 MHz ECC RDIMM Registered Server Memory |
| Part number | MR25600-744K1 |
| Total capacity | 128 GB |
| Product type | 288-Pin DDR4 RDIMM |
| Performance | |
| Rated speed | DDR4 3200 (PC4 25600) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL22 |
| ECC support | Yes |
| Buffer type | Registered |
| Heat spreader | No |
| Memory rank | 4Rx4 |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | Supermicro |
| In the box | |
| Included items | 128 GB (1 × 128 GB) DDR4 3200 MHz PC4-25600 4Rx4 1.2 V CL22 288-PIN ECC RDIMM Registered Server Memory |
Yes, the module uses the standard 288-pin DDR4 RDIMM form factor that matches Supermicro server DIMM slots.
Power down, open the chassis, align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips click, then verify the 3200 MT/s speed and CL22 timing in BIOS.
The module has no heat spreader and runs at 1.20 V; with proper airflow it typically lasts the server's service life, and the vendor provides a lifetime replacement warranty.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?