Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 128 GB DDR4 3200 ECC RDIMM module with CL22 latency and 1.2 V operation for Thinkmate SBGrid-CryoEM workstations
This 128GB registered DIMM is built for the Thinkmate SBGrid-CryoEM workstation. It adds a single high-density module to systems that require ECC error correction and registered signalling. The module suits scientific computing workloads that demand maximum capacity per slot.
Operating at 1.20V with CL22 latency, the module draws minimal power for its density. No heat spreader is fitted, so airflow across the bare PCB handles cooling. Registered buffering reduces electrical load on the memory controller, helping stability under sustained throughput.
The 288-pin form factor installs directly into a compatible DDR4 RDIMM socket. One module delivers 128GB, freeing remaining slots for further expansion. Builders needing non-ECC or unbuffered memory should choose a different product line.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | THINKMATE Server/Workstation Compatible Series Memory |
| Model name | THINKMATE DDR4 3200 MHz ECC RDIMM Registered Server Memory |
| Part number | MR25600-744K1 |
| Total capacity | 128 GB |
| Product type | 288-Pin DDR4 RDIMM |
| Performance | |
| Rated speed | DDR4 3200 (PC4 25600) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL22 |
| ECC support | Yes |
| Buffer type | Registered |
| Heat spreader | No |
| Memory rank | 4Rx4 |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | THINKMATE |
| In the box | |
| Included items | 128 GB (1 × 128 GB) DDR4 3200 MHz PC4-25600 4Rx4 1.2 V CL22 288-PIN ECC RDIMM Registered Server Memory |
Power down, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until both latches click, then verify in BIOS that the 128GB module registers at 3200 MT/s with ECC active — the step most often missed is confirming ECC mode is enabled in firmware after installation.
No scheduled maintenance is required; the module has no heat spreader or moving parts, so only replace it if memory diagnostics report uncorrectable ECC errors or if a future capacity upgrade demands a different rank configuration.
The CAS latency of CL22 at 3200 MT/s sets the baseline access latency; under sustained heavy load the memory controller’s timing budget is reached before thermal or voltage limits, since the module operates at the standard 1.20V without overclocking headroom.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?