Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
128 GB DDR5 5600 registered ECC RDIMM with CL46 latency, 1.1 V operation, 4Rx4 organisation and 288 pins for SuperMicro server boards
This 128GB DDR5 5600 ECC registered module is built for SuperMicro X13SEI-F and X13SEI-TF motherboards. It delivers 44800 MT/s bandwidth with CL46 latency at 1.10V. The 4Rx4 Samsung, Micron or Hynix chips provide error-correcting stability for server workloads.
Install one 128GB stick to maximise density in a single 288-pin slot. Builders populating multiple channels should verify platform rank limits per channel. Systems requiring unbuffered UDIMMs or lower-density modules cannot use this registered 4Rx4 part.
The quad-rank x4 organisation counts as four logical ranks on the memory bus. SuperMicro X13 platforms typically allow eight ranks per channel, so two such modules fill one channel. Exceeding the rank limit prevents boot or forces speed reduction.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | SuperMicro Server/Workstation Compatible Series Memory |
| Model name | SuperMicro DDR5 5600 MHz ECC RDIMM Registered Server Memory |
| Part number | MR44800-744K1 |
| Total capacity | 128 GB |
| Product type | 288-Pin DDR5 RDIMM |
| Performance | |
| Rated speed | DDR5 5600 (PC5 44800) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL46 |
| ECC support | Yes |
| Buffer type | Registered |
| Heat spreader | No |
| Memory rank | 4Rx4 |
| Power | |
| Rated voltage | 1.1 V |
| Compatibility | |
| Compatible systems | Supermicro |
| In the box | |
| Included items | 128 GB (1 × 128 GB) DDR5 5600 MHz PC5-44800 4Rx4 1.1 V CL46 288-PIN ECC RDIMM Registered Server Memory |
Yes, this is a registered RDIMM with ECC, so the motherboard must support registered DDR5 memory and ECC functionality for it to operate correctly.
It can be installed alongside other DDR5 modules, but the system will run all memory at the speed of the slowest module and may require matching rank configurations for optimal stability.
Check the BIOS or UEFI memory information screen to confirm the module is detected at 5600 MT/s with CL46 timings and 1.10V voltage.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?