Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 128 GB DDR5 6400 MHz ECC registered DIMM with CL52 latency and 1.1 V operation for the Supermicro SYS-222HA-TN
This 128GB DDR5 registered DIMM delivers error-correcting memory for the Supermicro SYS-222HA-TN server. It runs at 6400MHz with CL52 latency at 1.1V. The module uses a 2Rx4 organisation and major OEM DRAM chips. It is built for enterprise workloads that require data integrity and high capacity.
This module suits administrators upgrading the Supermicro SYS-222HA-TN with validated ECC RDIMM memory. It is not for desktop PCs or laptops that require unbuffered non-ECC DIMMs. Builders needing lower capacities or different speeds should look at other system-specific kits. Workstations without registered memory support cannot use this module.
Installation follows the standard 288-pin DDR5 RDIMM procedure: power down, open the chassis, align the notch, and press until the ejectors latch. The registered buffer adds negligible physical effort. The usual mistake is mixing registered and unbuffered DIMMs in the same channel, which prevents the system from posting. Always populate slots per the motherboard manual.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | NEMIX RAM Original Series Server Memory |
| Model name | DDR5 ECC RDIMM Registered Server Memory |
| Part number | MR51200-724K1 |
| Total capacity | 128 GB |
| Product type | 288-Pin DDR5 RDIMM |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL52 |
| ECC support | Yes |
| Buffer type | Registered |
| Heat spreader | No |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.1 V |
| Compatibility | |
| Compatible systems | Supermicro |
| In the box | |
| Included items | 128 GB (1 × 128 GB) DDR5 6400 MHz PC5-51200 2Rx4 1.1 V 288-PIN ECC RDIMM |
The module uses a 288-PIN DDR5 RDIMM form factor, so the motherboard must provide a matching 288-PIN DDR5 DIMM slot.
The module operates at 1.1V; if the platform only supplies 1.2V the memory may not initialise or could run out of spec.
Check the BIOS memory information or OS tools such as dmidecode to verify the module reports 6400MHz, CL52, 2Rx4 organisation and ECC active.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?