We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 SODIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 16GB 2x8GB DDR4 2133 CL15 SODIMM POSIFLEX RT-5015

SKU CH-V5KW-TH3VB

A 16 GB DDR4 SODIMM kit (2 × 8 GB) rated at 2133 MT/s CL15 for the POSIFLEX RT-5015 terminal

  • Total capacity16 GB (2 × 8 GB)
  • Rated speedDDR4 2133 (PC4 17000)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL15
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • 16 GB dual-channel kit boosts multitasking on the POSIFLEX RT-5015 terminal
  • DDR4 2133 MHz PC4-17000 CL15 delivers responsive performance for point-of-sale workloads
  • Low 1.2 V operation reduces power draw and heat in compact kiosk enclosures
  • 260-pin SODIMM form factor installs directly into the terminal without adapters
  • Rigorously stress-tested modules built with major OEM chips ensure long-term reliability

POSIFLEX RT-5015 DDR4 SODIMM kit

This 16 GB kit contains two 8 GB DDR4 2133 SODIMM modules built for the POSIFLEX RT-5015 terminal. Each stick runs at 1.2 V with CL15 latency and uses a 260-pin unbuffered non-ECC layout. The dual-rank 2Rx8 organisation matches the platform’s memory controller.

Upgrade from 8 GB or slower DDR4

Replacing a single 8 GB module or a lower-speed DDR4 kit adds capacity and bandwidth for point-of-sale workloads. The jump is worthwhile when the terminal runs multiple applications or larger databases that exceed the original memory limit. No benefit appears if the system already has 16 GB of matched DDR4 2133 memory.

Tool-free slot access on the terminal

The RT-5015 exposes SODIMM slots behind a service panel so installation takes minutes with no tools. Align the notch, press firmly until the latches click, then verify the new total in BIOS. The most common issue is inserting a module at an angle, which leaves a pin unseated and prevents boot.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $84.99
Cheaper than about 69% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB (2 × 8 GB)
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $5.31 per GB
Cheaper than about 73% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR4 2133 MHz Non-ECC Unbuffered SODIMM
Part numberMS17000-828K2
Total capacity16 GB (2 × 8 GB)
Product type260-Pin DDR4 SODIMM
Performance
Rated speedDDR4 2133 (PC4 17000)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL15
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items16 GB (2 × 8 GB) DDR4 2133 MHz PC4-17000 2Rx8 1.2 V CL15 260-PIN Non-ECC Unbuffered SODIMM KIT

Questions about this item

Does the 260-pin SODIMM form factor match the memory slots in the POSIFLEX RT-5015 terminal?

Yes, this kit uses the standard 260-pin DDR4 SODIMM layout required by the POSIFLEX RT-5015, so each 8 GB module seats directly into the terminal's two memory sockets.

What is the correct orientation step when inserting the modules into the RT-5015, and what mistake do installers often make?

Align the notch on the module's gold edge with the key in the slot, press firmly until the side clips click; the common error is stopping before the clips engage, leaving the module partially seated.

Will the memory require any firmware updates or periodic replacement after installation in the POSIFLEX RT-5015?

No firmware update is needed; the JEDEC-standard 2133 MT/s CL15 1.2 V modules run at rated speed on first boot and have no wear-out mechanism, so they remain in service for the terminal's lifetime.

More in Model-Specific Memory Upgrades

Similar items