We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2400 CL17 SODIMM Kit for POSIFLEX XT-6515 JIVA

SKU CH-0WS1-ED45D

A 16 GB dual-channel DDR4 SODIMM kit running at 2400 MHz with CL17 latency and 1.2 V operation, built for the POSIFLEX XT-6515 JIVA terminal

  • Total capacity16 GB (2 × 8 GB)
  • Rated speedDDR4 2400 (PC4 19200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL17
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • 16 GB kit boosts multitasking on POSIFLEX XT-6515 JIVA
  • DDR4 2400 speed matches system bus for stable throughput
  • CL17 latency keeps response tight during transactions
  • 2 V low voltage reduces heat in fanless chassis
  • 260-pin SODIMM form factor fits the terminal slot exactly

System-Specific DDR4 Kit

This 16GB (2 x 8GB) DDR4 2400 SODIMM kit is built for the POSIFLEX XT-6515 JIVA terminal. It uses unbuffered, non-ECC modules at 1.20V to match the platform's requirements. The 260-pin form factor fits the system's memory slots directly without adapters.

Sustained Load Stability

Each module is stress tested under load to verify reliable operation during continuous point-of-sale workloads. The CL17 latency and 2Rx8 organisation support steady throughput for transaction processing. Major OEM chips from Samsung, Micron or Hynix provide consistent signal integrity over long shifts.

No-Spreader Design

The modules ship without heat spreaders, keeping the slim profile required by the fanless chassis. Standard 260-pin SODIMM connectors allow straightforward installation by in-house IT staff. The kit delivers 16GB total capacity for environments that need more headroom than the base configuration.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $80.99
Cheaper than about 70% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB (2 × 8 GB)
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $5.06 per GB
Cheaper than about 76% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR4 2400 MHz Non-ECC Unbuffered SODIMM
Part numberMS19200-828K2
Total capacity16 GB (2 × 8 GB)
Product type260-PIN DDR4 SODIMM
Performance
Rated speedDDR4 2400 (PC4 19200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL17
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items16 GB (2 × 8 GB) DDR4 2400 MHz PC4-19200 2Rx8 1.2 V CL17 260-PIN Non-ECC Unbuffered SODIMM KIT

Questions about this item

How much heat or power does the 1.2 V DDR4 2400 kit draw when the POS terminal runs all day?

Each module operates at 1.2 V without a heat spreader, so typical power draw stays low and passive cooling inside the fanless POSIFLEX XT-6515 JIVA is sufficient for continuous use.

What must the POSIFLEX XT-6515 JIVA already have for this 260-pin SODIMM kit to work?

The terminal needs two free DDR4 SODIMM slots that accept 2Rx8 unbuffered non-ECC modules at PC4-19200 speed.

Will the CL17 2Rx8 modules run alongside any original memory still installed in the POSIFLEX XT-6515 JIVA?

Yes, if the existing sticks are also DDR4 2400 non-ECC unbuffered SODIMMs; the system will clock all modules to the slowest common timing.

More in Model-Specific Memory Upgrades

Similar items