Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR4-3200 dual-channel kit with CL22 timing for the Thinkmate GPX-WS-540X1 workstation
This 16 GB kit contains two 8 GB DDR4 modules built for the ThinkMate GPX-WS-540X1 workstation. The 288-pin UDIMMs run at 3200 MT/s with CL22 latency and 1.20 V operation. Non-ECC unbuffered design matches the platform requirements exactly.
Operating at 1.2 V reduces heat output compared to higher-voltage DDR4 kits. No heat spreader is fitted, so airflow across the bare PCB handles cooling in typical workstation chassis. Power draw stays within standard UDIMM limits for this speed grade.
Upgrading from lower-capacity or lower-frequency DDR4 modules adds bandwidth for multi-threaded workloads. The jump is worthwhile when the workstation runs memory-intensive applications and the board has free slots. Not suited for systems that require ECC or registered DIMMs.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | THINKMATE Server/Workstation Compatible Series Memory |
| Model name | THINKMATE DDR4 3200 MHz Non-ECC Unbuffered UDIMM |
| Part number | MD25600-818K2 |
| Total capacity | 16 GB (2 × 8 GB) |
| Product type | 288-Pin DDR4 UDIMM |
| Performance | |
| Rated speed | DDR4 3200 (PC4 25600) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL22 |
| ECC support | No |
| Buffer type | Unbuffered |
| Heat spreader | No |
| Memory rank | 1Rx8 |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | THINKMATE |
| In the box | |
| Included items | 16 GB (2 × 8 GB) DDR4 3200 MHz PC4-25600 1Rx8 1.2 V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT |
Power off the workstation, open the chassis, align each module’s notch with the slot key, press firmly until both retention clips click, then verify in BIOS that both 8 GB sticks are recognised at 3200 MT/s.
No scheduled maintenance is required; the modules have no heat spreaders and run at 1.20 V. Replace only if a stick fails or you need more than 16 GB total capacity.
The CAS latency of 22 cycles at 3200 MT/s sets the baseline response time; under heavy sustained loads the memory controller’s throughput ceiling is reached before thermal or voltage limits.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?