We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 288-Pin UDIMM THINKMATE Compatible memory upgrade

SKU CH-T6H2-270Q6

16 GB dual-channel DDR4-3200 CL22 kit built for ThinkMate XF6-14X1 workstations

  • Total capacity16 GB (2 × 8 GB)
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • 16 GB dual-channel kit boosts multitasking headroom
  • DDR4 3200 speed matches ThinkMate XF6-14X1 spec
  • CL22 latency at 1.2 V keeps power draw low
  • Unbuffered non-ECC 288-pin UDIMM drops straight in
  • Major OEM Samsung, Micron or Hynix chips ensure stability

ThinkMate XF6-14X1 Workstation Memory Kit

This 16GB kit contains two 8GB DDR4 UDIMM modules validated for the ThinkMate XF6-14X1 workstation. It runs at 3200MHz with a CAS latency of CL22 and operates at the standard 1.2V. The unbuffered, non-ECC design matches the platform's memory architecture for a direct upgrade.

Ideal for ThinkMate XF6-14X1 owners needing more

Builders who require error-correcting code memory, registered modules, or speeds beyond 3200MHz should look elsewhere. Systems that demand a heat spreader or a different pin count will not accept these sticks. This kit is strictly for compatible ThinkMate workstation boards.

Dual-rank 1Rx8 layout provides 16GB total capacity

Two modules populate two slots, leaving additional slots open for future expansion if the board supports more than 16GB. The PC4-25600 rating handles typical workstation workloads, while the CL22 timing sets the latency floor. Maximum supported capacity depends on the specific motherboard specification.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $100.99
Cheaper than about 68% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB (2 × 8 GB)
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $6.31 per GB
Cheaper than about 62% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineTHINKMATE Server/Workstation Compatible Series Memory
Model nameTHINKMATE DDR4 3200 MHz Non-ECC Unbuffered UDIMM
Part numberMD25600-818K2
Total capacity16 GB (2 × 8 GB)
Product type288-Pin DDR4 UDIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsTHINKMATE
In the box
Included items16 GB (2 × 8 GB) DDR4 3200 MHz PC4-25600 1Rx8 1.2 V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT

Questions about this item

My workstation is a THINKMATE XF6-14X1 — will this 288-Pin UDIMM kit fit the motherboard slots?

The kit is built as a THINKMATE compatible 288-Pin DDR4 UDIMM, so it installs directly into the XF6-14X1 memory slots without an adapter.

I plan to keep my existing DDR4 3200 CL22 modules — will the new 1Rx8 rank sticks work alongside them?

Both kits share the same DDR4 3200 speed, 1.20 V voltage and CL22 latency, so the motherboard can run them together at those settings.

After seating both 8 GB modules, how can I confirm the system sees the full 16 GB at 3200 MT/s?

Open the BIOS or UEFI on the THINKMATE workstation and verify the memory summary shows 16 GB total capacity running at 3200 MT/s with CL22 timings.

More in Model-Specific Memory Upgrades

Similar items