We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 ECC UDIMM sticks without heat spreaders

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 ECC UDIMM kit for ASRock X570 Taichi

SKU CH-FD59-F0FPG

16 GB DDR4-3200 ECC UDIMM kit, CL22 at 1.2 V, validated for ASRock X570 Taichi

  • Total capacity16 GB (2 × 8 GB)
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • 16 GB kit with two 8 GB modules for easy capacity scaling
  • DDR4 3200 speed rated at PC4-25600 for responsive data throughput
  • ECC unbuffered design detects and corrects single-bit errors automatically
  • CL22 latency at 1.20 V balances timing and power efficiency
  • Validated for ASRock X570 Taichi motherboard to ensure reliable compatibility

ECC UDIMM kit for ASRock X570 Taichi

This NEMIX RAM kit provides 16 GB of DDR4 ECC memory in two 8 GB modules. It runs at 3200 MHz with CL22 latency and 1.20 V. The unbuffered design fits desktop DIMM slots on the ASRock X570 Taichi motherboard.

Two 288-pin modules fill two slots

Each 1Rx8 module occupies a single DDR4 slot on the board. The kit leaves remaining slots free for future expansion. No heat spreader is fitted, so clearance under large air coolers is maximised.

Suited for builders adding ECC to X570 Taichi

Buyers who need registered or load-reduced modules should look elsewhere. Systems requiring speeds above 3200 MHz or lower CAS latency than CL22 are not addressed by this kit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $141.99
Cheaper than about 63% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB (2 × 8 GB)
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $8.87 per GB
Typical for this category: the median of 20,941 items is $8.19 per GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineASRock Server Motherboard Compatible Series Memory
Model nameASRock DDR4 3200 MHz ECC Unbuffered UDIMM
Part numberME25600-818K2
Total capacity16 GB (2 × 8 GB)
Product type288-Pin DDR4 ECC UDIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportYes
Buffer typeUnbuffered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsASRock
In the box
Included items16 GB (2 × 8 GB) DDR4 3200 MHz PC4-25600 1Rx8 1.2 V CL22 288-PIN ECC Unbuffered UDIMM KIT

Questions about this item

Does the CL22 latency limit sustained throughput on the DDR4 3200 kit?

CL22 is the rated CAS latency at 3200 MT/s; the modules run at 1.2 V and are stress-tested under load for stability during extended use.

How much heat does the 1.2 V ECC UDIMM kit produce during all-day operation?

Operating at 1.2 V with no heat spreader, the 1Rx8 modules generate minimal heat and run silently in a standard chassis airflow.

What motherboard slot and chipset are required for this 288-pin kit to function?

The kit needs an ASRock X570 Taichi motherboard with DDR4 288-pin UDIMM slots and ECC support enabled in the BIOS.

More in Model-Specific Memory Upgrades

Similar items