We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green SODIMM modules with gold contacts and black chips

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 SODIMM memory upgrade for Dell Latitude 5430 Rugged Extreme

SKU CH-J6ZP-WDC5K

16 GB DDR4 3200 SODIMM kit with two 8 GB modules for Dell Latitude 5430 Rugged Extreme

  • Total capacity16 GB (2 × 8 GB)
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • 16 GB kit boosts multitasking headroom with two 8 GB modules
  • DDR4 3200 speed matches Dell Latitude 5430 Rugged Extreme spec
  • CL22 latency and 1.2 V voltage keep system stable under load
  • 260-pin SODIMM form factor fits laptop slot without adapters
  • Major OEM chips from Samsung Micron Hynix ensure reliable operation

Dell Latitude 5430 Rugged Extreme upgrade

This 16GB kit uses two 8GB DDR4 3200 SODIMM modules built for the Dell Latitude 5430 Rugged Extreme. It targets field technicians and mobile professionals who need reliable memory expansion in a sealed, rugged chassis. The non-ECC unbuffered design matches the laptop’s standard memory controller without extra configuration.

CL22 1.20V 260-pin modules

Each stick runs at CL22 latency and 1.20V across the standard 260-pin DDR4 SODIMM interface. Major OEM chips from Samsung, Micron or Hynix are stress-tested under load before shipping. The low-voltage unbuffered layout keeps thermals simple in a fanless or limited-airflow rugged enclosure.

Replaces factory 8GB or slower SODIMMs

Moving from a single 8GB stick or lower-speed modules to this dual-channel 16GB kit doubles capacity and restores rated 3200 MT/s bandwidth. The jump is worth it when multitasking field apps, driving external displays or running virtual machines that exceed the original memory ceiling.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $87.99
Cheaper than about 69% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB (2 × 8 GB)
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $5.50 per GB
Cheaper than about 70% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineDell Laptop, AIO All-in-One, Mobile Workstation Compatible Series Memory
Model nameDell DDR4 3200 MHz Non-ECC Unbuffered SODIMM
Part numberMS25600-818K2
Total capacity16 GB (2 × 8 GB)
Product type260-Pin DDR4 SODIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsDell
In the box
Included items16 GB (2 × 8 GB) DDR4 3200 MHz PC4-25600 1Rx8 1.2 V CL22 260-PIN Non-ECC Unbuffered SODIMM KIT

Questions about this item

What speed and latency does the DDR4 3200 CL22 kit actually run at in the Dell Latitude 5430 Rugged Extreme?

The modules are rated for 3200 MT/s with CL22 timing at 1.20 V. The system will operate them at the highest speed its memory controller supports, which may be lower than the rated maximum.

Will the 260-pin SODIMM modules fit the memory slots inside the Latitude 5430 Rugged Extreme chassis?

Yes. The kit uses the standard 260-pin DDR4 SODIMM form factor with a 1Rx8 layout and no heat spreader, matching the slot and clearance requirements for this laptop.

How do I install the two 8 GB sticks, and what common mistake should I avoid?

Power off the laptop, remove the bottom cover, align each module's notch with the slot key, insert at an angle, then press down until the side clips click. A common mistake is not pressing firmly enough to fully seat both clips.

More in Model-Specific Memory Upgrades

Similar items