We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 SODIMM sticks with gold contacts and black chips

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 3200 PC4-25600 CL22 2Rx8 1.2V 260-pin SODIMM POSIFLEX ZT-3715E memory upgrade

SKU CH-DZ87-R9AJY

A 16 GB DDR4 SODIMM kit for POSIFLEX ZT-3715E terminals, running at 3200 MT/s with CL22 latency

  • Total capacity16 GB (2 × 8 GB)
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • 16GB DDR4 kit boosts POS terminal responsiveness
  • 3200MHz CL22 modules deliver stable data throughput
  • 2V operation reduces power draw and heat
  • 2Rx8 dual-rank design maximises memory density
  • Validated for POSIFLEX ZT-3715E Haydn ZT Series

POS terminal memory kit

This NEMIX RAM kit supplies 16GB of DDR4 3200 SODIMM memory in two 8GB modules built for the POSIFLEX ZT-3715E Haydn ZT series point-of-sale terminal. It runs at 1.20V with CL22 latency and uses unbuffered non-ECC 2Rx8 chips from major OEM suppliers.

Direct replacement for factory memory

The modules match the terminal’s 260-pin DDR4 SODIMM slot and PC4-25600 specification, so they install without configuration changes. The upgrade is worthwhile when the original capacity limits multitasking or when the system shows memory pressure during peak transaction loads.

Suits POS deployments needing more headroom

Technicians maintaining ZT-3715E terminals can use this kit to double the standard memory allowance. Buyers who need ECC protection, registered modules, or capacities beyond 16GB should look at server-class memory instead.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $91.99
Cheaper than about 69% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB (2 × 8 GB)
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $5.75 per GB
Cheaper than about 68% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR4 3200 MHz Non-ECC Unbuffered SODIMM
Part numberMS25600-828K2
Total capacity16 GB (2 × 8 GB)
Product type260-Pin DDR4 SODIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items16 GB (2 × 8 GB) DDR4 3200 MHz PC4-25600 2Rx8 1.2 V CL22 260-PIN Non-ECC Unbuffered SODIMM POS Memory KIT

Questions about this item

Will the 260-pin SODIMM modules fit the memory slots in the POSIFLEX ZT-3715E?

Yes, the kit uses the standard 260-pin DDR4 SODIMM form factor that matches the slots in the POSIFLEX ZT-3715E Haydn ZT Series terminal.

What is the correct way to seat the modules so they lock in place?

Align the notch on each module with the key in the slot, insert at a slight angle, then press down firmly until both side clips click and hold the module flat.

Will these CL22 1.2V modules need any firmware updates or replacement over time?

No firmware updates are required; the modules are validated for the POSIFLEX ZT-3715E and carry a lifetime replacement warranty from the manufacturer.

More in Model-Specific Memory Upgrades

Similar items