Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Dual-channel 16 GB DDR5 kit at 4800 MHz CL40, 1.1 V, validated for Alienware Aurora R15
This 16GB kit contains two 8GB DDR5 UDIMMs validated for the Dell Alienware Aurora R15 desktop. Each module runs at 4800 MT/s with a CL40 latency and 1.10V operating voltage. The 288-pin unbuffered non-ECC design matches the motherboard's memory slots directly. Builders upgrading this specific platform can install the pair without configuration changes.
Every stick uses Samsung, Micron or Hynix components screened under load before shipment. The 1Rx8 organisation and PC5-38400 rating reflect the exact timing table the Aurora R15 firmware expects. No heat spreaders are fitted, so the modules sit flush in tight chassis layouts. The kit ships as a matched pair to ensure dual-channel operation from the first boot.
The bare circuit board keeps the profile low enough for crowded DIMM banks or large CPU coolers. Gold-contact 288-pin edges resist oxidation during long service intervals. Dell-qualified firmware on the SPD chip allows the system to train at 4800 MT/s automatically. Buyers needing ECC, registered buffers or speeds beyond 4800 MT/s should select a different part number.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | Dell Server/Workstation Compatible Series Memory |
| Model name | Dell DDR5 5600 MHz Non-ECC Unbuffered UDIMM |
| Part number | MD38400-818K2 |
| Total capacity | 16 GB (2 × 8 GB) |
| Product type | 288-Pin DDR5 UDIMM |
| Performance | |
| Rated speed | DDR5 4800 (PC5 38400) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL40 |
| ECC support | No |
| Buffer type | Unbuffered |
| Heat spreader | No |
| Memory rank | 1Rx8 |
| Power | |
| Rated voltage | 1.1 V |
| Compatibility | |
| Compatible systems | Dell |
| In the box | |
| Included items | 16 GB (2 × 8 GB) DDR5 4800 MHz PC5-38400 1Rx8 1.1 V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT |
The CL40 timing is a fixed specification of these DDR5 modules and does not change with age; no maintenance or replacement of the latency setting is required.
The primary limit under sustained load is the 1.10 V operating voltage and CL40 latency, which define the stable speed ceiling for this 16 GB kit.
Without a heat spreader the bare DDR5 UDIMMs run at the standard 1.1 V, so they generate only modest warmth and zero audible noise in normal use.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?