We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two bare green SODIMM sticks with black chips side by side

NEMIX RAM

NEMIX RAM 16GB 2x8GB DDR5 5600 CL46 1.1V 262-pin SODIMM for Supermicro X14SAV-TLN4F memory upgrade

SKU CH-BEAT-PDAZ4

A 16 GB dual-channel DDR5 SODIMM kit running at 5600 MT/s with CL46 timing and 1.1 V operation, validated for the Supermicro X14SAV-TLN4F motherboard

  • Total capacity16 GB (2 × 8 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 16GB 2X8GB

  • 16 GB dual-channel kit boosts multitasking headroom with two matched 8 GB modules
  • DDR5 5600 speed delivers high bandwidth at the rated PC5-44800 data rate
  • CL46 latency and 1.1 V operation match the platform's memory-controller expectations exactly
  • 262-pin SODIMM form factor fits the Supermicro X14SAV-TLN4F motherboard without adapters
  • Major OEM Samsung Micron Hynix chips provide tested stability at the specified speed and timing

16 GB DDR5 SODIMM kit for Supermicro X14SAV-TLN4F

This 16 GB kit contains two 8 GB DDR5 SODIMM modules rated at 5600 MT/s with CL46 latency and 1.1 V operation. It is built for the Supermicro X14SAV-TLN4F motherboard and uses the 262-pin unbuffered form factor that the platform requires.

DDR5 5600 speed and CL46 timing limits

The memory runs at the DDR5 5600 (PC5-44800) standard with a fixed CL46 CAS latency and 1.1 V voltage. The module is non-ECC and single-rank 1Rx8, so the memory controller must support this exact timing and density combination for full-speed operation.

Verify Supermicro X14SAV-TLN4F population rules

Check the system manual for approved slot population order and maximum supported capacity before installing. The board requires 262-pin SODIMM modules; desktop UDIMMs will not fit and other DDR generations are electrically incompatible.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $182.99
Cheaper than about 59% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB (2 × 8 GB)
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $11.44 per GB
Pricier than about 56% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered SODIMM Memory
Part numberMS44800-818K2
Total capacity16 GB (2 × 8 GB)
Product type262-Pin DDR5 SODIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items16 GB 2 × 8 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 262-PIN Non-ECC SODIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Should I pick the 16 GB kit or a different capacity for my Supermicro X14SAV-TLN4F?

This kit provides 16 GB as two 8 GB modules, matching the board's DDR5-5600 SODIMM slots; check your manual for the maximum supported capacity and approved population order before deciding.

What does the DDR5-5600 rating deliver once the modules are installed?

The memory runs at 5600 MT/s with CL46 timing at 1.10 V, giving the bandwidth and latency the X14SAV-TLN4F memory controller expects for stable operation at rated speed.

Does the 262-pin SODIMM interface limit speed or capacity in this system?

The 262-pin DDR5 SODIMM form factor is the only type the board accepts; it carries the full DDR5-5600 signal and 1Rx8 organisation, so no interface bottleneck is introduced.

More in Model-Specific Memory Upgrades

Similar items